Prusament PLA
Prusa Research
The easiest material to print. Low shrinkage for large parts, sharp detail for small ones.
- 1.75 mm
- Low warping
Advanced materials
Outcome Focused Materials
Choose by the job the part has to do. Specialty materials come with an expert fit check.
- 1.75 mmfilament diameter
- ±0.02 mmPrusament tolerance, most materials
- 6groups, 21 materials
Everyday & prototyping
Fit checks, jigs, fixtures and models. The materials most parts start in.
Jessie Premium PLA
Printed Solid
Our own PLA line, made in-house. A wide color range, with custom color matching for branded or matched parts.
- 1.75 mm
- Color matching
Specialty material
PLA High Speed
Prusament
Cuts print time by 20–40% compared with standard PLA, with stronger layer bonding.
- 20–40% faster
Prusament PETG
Prusa Research
The most used technical material. Tougher and more heat-tolerant than PLA, still easy to print.
- Impact resistant
- Low warping
Jessie PETG
Printed Solid
Our own PETG line, made in-house. Tougher and more heat-tolerant than PLA, in a broad color range.
- 1.75 mm
- Impact resistant
PVB
Prusament
Transparent, prints like PLA, and can be smoothed to a near-glass finish.
- Transparent
- Smoothable
Heat & outdoors
Parts that sit near engines, motors or electronics, or out in direct sunlight.
ASA
Prusament
UV-stable for outdoor parts, with little stringing. Acetone vapor gives an injection-molded finish.
- UV-stable
- Acetone smoothing
PC Blend
Prusament
Polycarbonate blend that resists heat and a wide range of chemicals, with good electrical insulation.
- Up to 113 °C
Also in Chemical & lightweight
Specialty material
PA11 Carbon Fiber
Prusament
Heat resistance up to 190 °C depending on load, plus nylon’s chemical and wear resistance.
- Up to 190 °C
- Chemical resistant
Also in Strength & stiffness · Chemical & lightweight
Specialty material
PEI 1010
Prusament
Withstands around 200 °C and most chemicals. Tensile strength comparable to aluminum parts.
- ~200 °C
- UL 94 VTM-0
- Pro HT90
Also in Strength & stiffness · Chemical & lightweight
PC Blend Carbon Fiber
Prusament
Carbon-filled PC blend with excellent dimensional stability and a satin finish.
- Hardened nozzle
Also in Strength & stiffness
Specialty material
PC Space Grade
Prusament
Low outgassing and electrostatic dissipation, with heat resistance up to 137.6 °C.
- Low outgassing
- ESD
- 137.6 °C
Also in Specialty
Flexible
Parts that bend, absorb impact or seal against a surface.
TPU 95A
Prusament
Stays elastic and impact-resistant down to −50 °C, with low moisture absorption and good oil resistance.
- 95A
- Elastic to −50 °C
- HDT 78.6 °C
Strength & stiffness
Fiber-filled and nylon materials for parts that carry load, wear or move.
Specialty material
PA11 Carbon Fiber
Prusament
Heat resistance up to 190 °C depending on load, plus nylon’s chemical and wear resistance.
- Up to 190 °C
- Chemical resistant
Also in Heat & outdoors · Chemical & lightweight
Specialty material
PEI 1010
Prusament
Withstands around 200 °C and most chemicals. Tensile strength comparable to aluminum parts.
- ~200 °C
- UL 94 VTM-0
- Pro HT90
Also in Heat & outdoors · Chemical & lightweight
PETG Carbon Fiber
Prusament
Better dimensional stability and heat resistance than PETG, with a dark matte finish.
- 0.4 mm hardened nozzle
PC Blend Carbon Fiber
Prusament
Carbon-filled PC blend with excellent dimensional stability and a satin finish.
- Hardened nozzle
Also in Heat & outdoors
Specialty material
PA11
Prusament
Nylon with low friction and good abrasion resistance, for parts that rub and move.
- Low friction
- Wear resistant
Also in Chemical & lightweight
Chemical & lightweight
For labs, fluid handling and anything that has to fly.
PC Blend
Prusament
Polycarbonate blend that resists heat and a wide range of chemicals, with good electrical insulation.
- Up to 113 °C
Also in Heat & outdoors
Specialty material
PA11 Carbon Fiber
Prusament
Heat resistance up to 190 °C depending on load, plus nylon’s chemical and wear resistance.
- Up to 190 °C
- Chemical resistant
Also in Heat & outdoors · Strength & stiffness
Specialty material
PEI 1010
Prusament
Withstands around 200 °C and most chemicals. Tensile strength comparable to aluminum parts.
- ~200 °C
- UL 94 VTM-0
- Pro HT90
Also in Heat & outdoors · Strength & stiffness
Specialty material
PA11
Prusament
Nylon with low friction and good abrasion resistance, for parts that rub and move.
- Low friction
- Wear resistant
Also in Strength & stiffness
Specialty material
Polypropylene CF / GF
Prusament PP Carbon Fiber · PP Glass Fiber
Resists solvents, non-oxidizing acids and bases, and oils. Light but durable. Prints on the PP sheet.
- Chemical resistant
- PP sheet
Specialty material
PLA-LW
Prusament
Foams in the nozzle so prints come out up to 65% lighter. Two to three times as many parts per spool.
- Up to 65% lighter
Specialty
Materials chosen because a specification or application calls for them.
Specialty material
PETG V0
Prusament
PETG rated UL 94 V-0 for flame. For enclosures and interiors where a flame rating is written into the spec.
- UL 94 V-0
Specialty material
PC Space Grade
Prusament
Low outgassing and electrostatic dissipation, with heat resistance up to 137.6 °C.
- Low outgassing
- ESD
- 137.6 °C
Also in Heat & outdoors
Specialty material
PETG Tungsten 75%
Prusament
Tungsten-filled PETG for radiation shielding. Non-toxic, unlike lead, and made in hours instead of weeks.
- Radiation shielding
- High density
Specialty material
PETG Magnetite 40%
Prusament
Paramagnetic and dense, with a satin dark-gray finish.
- Paramagnetic
- High density
PETG Ultraglow
Prusament
Prusa’s brightest glow-in-the-dark filament. Charges under UV or visible light and glows for hours in total darkness.
- Glow in the dark
Talk to an Expert
Send us the part. We'll match the material.
Operating temperature, chemicals it will touch, how it's loaded, and which printer you run. A US specialist replies within one business day with a material, print profile and quote.
Talk to an Expert
Or call (302) 439-0098