Printed Solid
Jessie Premium PETG 1.75mm X Bold Blue 1kg
Jessie Premium PETG 1.75mm X Bold Blue 1kg
Couldn't load pickup availability


































Why Jessie Premium PETG?
Jessie is Printed Solid’s own exclusive filament line. Higher quality, easy prints, and a continued dedication to the community. Named after David Randolph’s dog.
Made in the USA
Our filament is made in Delaware, USA. Unlike other brands that just respool foreign-made filaments and call it American-made. We make a truly end to end filament here in the USA.
Environmentally-friendly
We keep environmental impact as low as possible with cardboard spools and a low loss extrusion process to minimize waste.
Superior Material
Jessie is a constantly evolving extrusion line with new colors and materials planned. We also are working on better spooling, even tighter tolerances and adding in more and more quality control beyond the industry standards.
Pure Colors
Our color catalog is constantly expanding. Our colors are never dulled down with fillers, so your prints will be radiant and just the right tone, every time.
Jessie Premium PETG Specs



- Reviews
- Questions
- filament
- issues
- parts
- price
- printing
- hotend
- gears
- mmu2
- Gcode
- difficulty

Great for cost.
Overall experience is positive. Happy with tight tolerance (I believe ± .02mm?), inexpensive price and free shipping over $50. Would be thrilled to see more uniform spooling of the filament, I’ve noticed that it sometimes ‘catches’ a bit which results in the spool and filament jerking on the extruder as it’s printing. For how much less expensive it is than prusament, I’d say worth.

Love the color, esay to setup, defaults are now in Prusaslicer
I'm very happy with the filament. It prints clean and I've had little difficulty with printing (I just went through some other filaments that caused several issues). It pulls through multiple gears without issue and hasn't cause a load/unload issues. The below isn't unique to the filament. With a MMU2, I use custom Gcode at the end of filament to lower the temp (M109 SXXX) so the end forms properly. I think I lower it back to 230 from the print temp of 240. M109 will hold the hotend on the print while it waits for the temp to be reached so if you want you can also move the hotend (G1 Xxxx Yyyy Zzzz) to a new location so a small blob doesn't form.

Now with Prusaslicer default settings
I'm very happy with the filament. It prints clean and I've had little difficulty with printing (I just went through some other filaments that caused several issues). It pulls through multiple gears without issue and hasn't cause a load/unload issues. The below isn't unique to the filament. With a MMU2, I use custom Gcode at the end of filament to lower the temp (M109 SXXX) so the end forms properly. I think I lower it back to 230 from the print temp of 240. M109 will hold the hotend on the print while it waits for the temp to be reached so if you want you can also move the hotend (G1 Xxxx Yyyy Zzzz) to a new location so a small blob doesn't form.

Great
Great quality filament that doesn’t jam and makes great parts.

Very nice filament at the right price...
Very nice filament at the right price... Need more colors..