PRUSA RESEARCH ACQUIRES PRINTED SOLID INC. TO BE THEIR EXCLUSIVE RESELLER AND SERVICE CENTER IN THE USA
Printed Solid
Voron V2.4r2 ACM Sheets for Sides and ACM doors with windows
Voron V2.4r2 ACM Sheets for Sides and ACM doors with windows
Couldn't load pickup availability
This is a special order and can take up to 5 days to process.
You asked for it and we deliver.
ACM for the sides and front doors on the Voron V2.4r2 Printer.
There are 3 different sizes for the Voron V2.4r2 printers and they each have different size pieces. Select the right one for the printer you are building.
The doors have a 120mm cut out on them with 4 bolt holes to bolt in a piece of acrylic which is included. Voron V2 / V2.4 / 2.4 / 2.4r2
Voron V2.4r2 250mm build size kit includes
1 ACM Piece 383mm x 383mm Top
2 ACM Pieces 383mm x 403mm Sides
2 ACM Pieces 191.5mm x 403mm Doors
2 Clear Acrylic widows for the doors
All pieces are 3mm thick
Voron V2.4r2 300mm build size kit includes
1 ACM Piece 433mm x 433mm Top
2 ACM Pieces 433mm x 453mm Sides
2 ACM Pieces 216.5mm x 453mm Doors
2 Clear Acrylic widows for the doors
All pieces are 3mm thick
Voron V2.4r2 350mm build size kit includes
1 ACM Piece 483mm x 483mm Top
2 ACM Pieces 483mm x 503mm Sides
2 ACM Pieces 241.5mm mm x 503mm Doors
2 Clear Acrylic widows for the doors
All pieces are 3mm thick
- Reviews
- Questions
- panels
- enclosure
- best
- materials
- results
- tool
- fact
- doors
- edges
- outside
Great quality items
Got what I paid for, work perfectly well. As a suggestion, if anyone reads these, The option of larger (longer) acrylic windows might be nice to have, so that I can see the the first layer easier. Right now I have one door with the window at the top, and the other flipped around so that the window is at the bottom.
United StatesFantastic ACM Panels!
These panels are quality and cut with precision. I have no complaints and would certainly recommend them and buy them again. Switching to these from acrylic and adding radiant barrier increased my chamber temp from 40c to 60c.
United StatesIt's nice and warm now
My printer lives in the garage and in the winter the chamber would struggle to get up to 40 degrees C, even with the printer completely wrapped in moving blankets. The ACM panels with some foam insulation and a chamber heater solved that. The chamber is now a balmy 60 degrees C, even with the garage being in the low teens Fahrenheit. This was definitely a project all by itself, but I'm very happy with the results. I may add the doors later, but I like being able to look into the printer and it's plenty warm.
United StatesAluminum Composite Panels
I like the panels for their material choices and the fact that they are even offered without having to cut them myself. For this review I will start with a bit of constructive criticism. They may be CNC machined but the machining quality is a bit lower than expected, but if you aren't a machinist or a knowledgeable hobbyist, you wouldn't know what to look for. Upon a very meticulous inspection, you can see the start/stop points of the cuts along the outside of the panels and it is much more noticeable on the inside of the window cutouts. Mine came with sharp edges and aluminum flakes all over the plastic, which is a health hazard for multiple reasons. The holes that are drilled were not de-burred leading to a small incision on my index finger when installing the acrylic windows. Nothing some isopropyl alcohol couldn't fix. Now for the good, as it says on the plastic to the panels, these are "sign grade" materials which means they are meant for relatively harsh environments from the outdoors. They hold up very well to the high heat applications I am putting them through with a bit of help from some automotive heat shielding mats that reflect radiant heat up to 2000F and direct heat of 400F. If you do a little bit of research into the brand provided, they list their product as being corrosion resistant, scratch resistant, UV resistant, and UL879 compliant for electrical enclosure applications making it perfect for use as the bottom panel of the Voron where all of the electronics are located. The fit is fantastic and I was easily able to add an additional cutout to mount an 800W heater to the enclosure for a good 100C chamber temp. All said and done, these are great panels that are, quite literally, just a little rough around the edges. Much appreciation to the Printed Solid team for providing these ready made panels. Use a de-burring tool or some 2000 grit sandpaper and those rough edges are gone. Thanks again, AM
United StatesI love my all ACM
You guys are the best ever
- Choosing a selection results in a full page refresh.