E3D

1.75mm E3D VOLCANO Nozzle X - Wear Resistant Nozzle

1.75mm E3D VOLCANO Nozzle X - Wear Resistant Nozzle

Regular price $ 29.80 USD
Regular price Sale price $ 29.80 USD
Sale Sold out
1 review
Filament Diameter
Nozzle Diameter
View full details
Skip to product information
1 of 2

For E3D Volcano only

 

From E3D:

Whilst our hardened steel nozzles are ideal for printing abrasive filaments such as ones loaded with Carbon Fibre, the extreme temperatures can cause the steel to temper and soften, ultimately reducing its abrasion resistance. And then there's our plated copper nozzles, able to cope easily with these immense temperatures but lacking the abrasion resistance required to resist Carbon Fibre. This is where the Nozzle X comes in, a nozzle able to withstand crazy temperatures without softening. 

By going with a one-piece all-machined construction we were able to use our existing manufacturing processes to create our carefully tuned internal geometry, which provides fantastic flow response and keep the exact same geometry and compatibility as the rest of the E3D ecosystem. 

Benefits of our WS2 ‘polyphobic’ nano-coating:

  • Less build up, particularly of sticky and filled materials to the nozzle cone
  • Improved first layer reliability; the slick coating has a reduced tendency to ‘drag’ material, particularly at sharp corners where tracks can peel up
  • Slicker, smooth top solid layers with a glassy like finish as a result of the smooth laydown of material
  • Easier nozzle cleaning, what little material that does adhere is easily wiped away with a paper towel leaving a very clean nozzle.

 

 

Customer Reviews
5.0 Based on 1 Reviews
5 ★
100% 
1
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • Made in the USA
  • Enders
  • Afinia
  • Covid Workers
  • No one
  • Printer 20hours
  • face shields
  • Jessie PLA
  • Team
  • Raise3D
GL
04/18/2020
gary l.
United States United States

Printed solid filament is perfect

My team been using printed solid Jessie PLA in about 15 Printer 20hours + a day for the past few weeks. We have been printing Face Shields for Covid Workers. No one has had a problem with the filament once it is dialed in. We have a range of printers from Enders, Taz’s, Raise3D, Afinia, Prusa, and a few others. I was a fan before all of this, but now I’m completely sold on their PLA. I also like the fact that this is a “Made in the USA” item.