| Measurements |
| Build Volume |
250 x 220 x 270 mm | 9.8 x 8.6 x 10.6 in |
| Filament diameter |
1.75 mm |
| Layer height |
0.05-0.30 mm |
| Printer dimensions |
22,5 kg, 415×444×555 mm; 16.3×17.5×21.8 in (X×Y×Z) |
| Electronics |
| Mainboard |
Custom 32-bit xBuddy electronics with STM32 |
| Stepper Drivers |
Trinamic 2130 |
| Stepper motors |
Precise 0.9° X,Y stepper motors (prevents VFA) |
| Extruder |
| Extruder |
Nextruder, Direct Drive, E3D V6 compatible (with adapter) |
| Extruder electronics |
Custom breakout board for connecting fans, thermistors and other parts. |
| Filament path |
Aluminum heatsink, all-metal hotend |
| Drive system |
Nextruder Planetary Gear System, 10:1 gearbox ratio |
| Cooling fan |
High-performance turbine, 360° cooling system |
| Nozzle |
High-flow Prusa Nozzle brass CHT - 0.4 mm |
| Max. operating temperature |
| Max nozzle temperature |
290 °C / 554 °F |
| Max heatbed temperature |
120 °C / 248 °F |
| Max chamber temperature |
55 °C / 131 °F |
| Controls |
| LCD screen |
3.5″ graphic 65k color screen |
| Touch control |
Yes |
| Firmware update interface |
USB drive, Prusa Connect, Prusa Mobile App |
| Prusa Connect support |
Yes |
| Prusa App for iOS and Android support |
Yes |
| Quick-Swap nozzle system |
Yes |
| Lighting |
Yes |
| Accessories |
| Internal camera |
optional, in-chamber solution |
| MMU3 support |
Yes |
| HEPA filtration |
optional addon |
| Advanced Filtration System |
optional addon |
| GPIO Board compatibility |
Yes |
| Accelerometer compatibility |
Yes |
| Connectivity |
| Ethernet connection |
Yes |
| Wi-Fi |
NFC receiver, optional ESP Wi-Fi module (delivered with the printer) |
| Sensors |
| Filament Sensor |
Yes (2 sensors) |
| Loadcell sensor |
Yes |
| Thermistors |
5 high-precision thermistors (genuine Semitec) |
| Fan motors monitoring |
Yes |
| Door sensor |
Yes |
| Printing |
| Print medium |
USB drive / LAN / internet via Prusa Connect or mobile Prusa App |
| Print surface |
Magnetic heatbed with removable PEI spring steel sheets |
| First layer calibration |
Fully automatic (thanks to the Load Cell sensor) |
| Bed calibration |
Automatic, Mesh Bed Leveling (only on print area) |
| Input shaper |
Yes |
| Supported materials |
PLA, PETG, Flex, PVA, PC, PP, CPE, PVB and when using the optional Advanced Filtration System ABS, ASA, HIPS, PA |
| Phase Stepping |
Yes |
| Power |
| PSU |
240W |
| Power panic |
Custom made by Delta with Power Panic HW |
| Power consumption |
PLA settings: 90W / ABS settings: 110W |
PRUSA RESEARCH ACQUIRES PRINTED SOLID INC. TO BE THEIR EXCLUSIVE RESELLER AND SERVICE CENTER IN THE USA
