Polymaker PolyMide CoPA Nylon 750g


Available in Black or Natural

PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.

Nylon is an awesome technical material, but some care should be taken to ensure best performance.  

Nylon is moisture sensitive so we advise a Polybox

Special bed adhesion and an enclosure is not required for this material, but is suggested for larger prints.  For adhesion, we advise GeckoTek EZ Stick Hot.  Finally, we advise proper ventilation and an enclosure with this material.


Warp Free: PolyMide™ CoPA is engineered to give excellent dimensional stability during printing, with near-zero warping.

Easy Printing: Unlike other Nylon filaments, PolyMide™ CoPA is extremely easy to work with. It is compatible with most filament-based 3D printers with no heated chamber/bed required!

Strong & Tough: The outstanding mechanical strength and toughness makes PolyMide™ CoPA the best choice of engineering material for your creative ideas!

Heat Resistant: With a high softening temperature of ~180 °C, PolyMide™ CoPA is one of the most heat resistant 3D printing materials in the market.


Net Weight

750 g


1.75 mm / 2.85 mm


± 0.05 mm (Typical ~ ± 0.02 mm )

Recommended Printing Temp*

250 – 265 °C

Recommended Printing Speed*

40 – 60 mm/s

Recommended HBP1 (if equipped) Temp

Up to 70 °C

Note 1.HBP=Heated Build Plate

*.Printing temperature and speed may vary

Related Items