Extremely Tough : Regular PLA is a strong, but brittle material. PolyMax PLA was designed to change this. Featuring increased impact strength of up to 9 times that of regular PLA and 20% higher than than ABS.So if you are looking for a material that can withstand your mechanically demanding tasks, PolyMax PLA is up to the challenge.
Uncompromised Quality : The good mechanical strength of PolyMax PLA is achieved with no compromise in printing quality. As PolyMax PLA is also produced with Jam-Free technology you can be certain you will get high quality prints with excellent strength while still enjoying the ease of printing PLA.
Glass Transition Temp
~ 60 °C (140 °F)
Filament Melting Point
150 160 °C (302 320 °F)
1.75 mm or 3 mm
± 0.05 mm
(Typical~ 0.02 mm )
General Printing Settings
180 240 °C
Recommended 3D printing temperature:
185 200 °C (Diameter of 1.75mm and with Heated Bed)
200 230 °C (Diameter of 1.75mm and without Heated Bed)
200 230 °C (Diameter of 3mm)
Recommended 3D print speed:
40 120 mm/s
Technical Data Sheets:
If your looking for more information on PolyMax PLA then you can download the material technical data sheet here
- Choosing a selection results in a full page refresh.