Print easily and flawlessly with the Materio3D PLA, a Canadian-made high-quality 3D printing filament.
Materio3D PLA uses the NatureWorks Ingeo 3D850 polymer, specially engineered for 3D printing. It is tougher and stronger than standard PLA and can be annealed for improved heat resistance and toughness!
Ease-of-use and a large selection of colors for great prints, every time!
Diameter : 1.75mm
Material: NatureWorks Ingeo 3D850 PLA
Diameter tolerance : ± 0.03mm
Density: 1.25 g/cm3 ± 0.01
Print temperature : 190°C – 230°C
Nozzle size : Any
Retraction: Depending on the printer. See printer specifications.
Hot print bed: 50°C – 70°C
Cold print bed: Yes (use painter's tape for better adhesion)
Post processing: Annealing (80°C – 130°C)
$ 54.99 $ 59.99
colorFabb PLA Economy is an option for those looking to maintain the high quality standards that colorFabb adheres to but without the special performance characteristics of their other filament. The economy PLA is provided on large spools and in large quantities of 2.2kg so that you get more value per kilogram out of your purchase.
Note that the spool size is much larger than can fit on nearly any standard printer spool holder. So, you will need to print one. OD is 300mm, Bore is 52mm, and width is 102mm. ColorFabb has shared their design for a spool holder here.
Colorfabb PLA Economy
Printing Temperature: 195C-220C works well on most printers
Printing Speed: 40 - 100 mm/s
Heated Bed Temperature (if you have one, not strictly necessary): 50-60C
Cooling fan: Off for the first layers, then100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.
Diameter Tolerance: ± 0.1 mm or better
Density: 1,2-1,3 g/cm3
Glass Transition Temperature: 55C
View full product details
Why do we like this material and what do we use it for? Polyalchemy Elixir has a uniquely pearlescent appearance. It is a great choice for unique effects on aesthetic print and it is easy to print. We consider this to be a great choice for visual effect, but find it is not well suited for structural prints. Try printing something like a Julia vase as your first part and you will be amazed.
$ 21.49 $ 24.49
Introducing Printed Solid's First custom made filament.
This is a simple standard grade, *American Made* PLA suitable for all your daily printing projects. Use it for all your prints that are suitable for standard grade PLA.
**NOW IN 13 COLORS**
Amount - 1kg of Filament on a spool
Bed: Room Temperature to 60C
Print Surface: Whatever you use for normal PLA is great. Our suggestion is PEI when you use a heated bed and blue tape for a cold bed, but whatever you are presently using for PLA will be great for this as well.
Nozzle: No special nozzle requirements for this. Print with whatever diameter and material nozzle you prefer.
Cooling: 100% for most setups.View full product details