MakerGear M3-SE 3D Printer

By Makergear

Regular price $ 2,550.00 $ 0.00 Unit price per

Free shipping in the continental U.S. on orders over $45*

MakerGear M3-SE 3D Printer
MakerGear M3-SE 3D Printer
MakerGear M3-SE 3D Printer



Build Dimensions

203 x 254 x 203 mm

Build Plate

Up to 110 °C. Borosilicate glass build plate coated with polyimide film.

Assisted Leveling

Yes - True-Leveling

Filament Feed

Direct (non-Bowden).


1.75 mm. ABS, ASA, HIPS, Nylon, PET-G, PET-T, PLA, polycarbonate, polypropylene, PVA, TPE, TPU, metal composites, wood composites, carbon fiber composites, and more.


Ships with 0.35 mm brass (0.25mm, 0.5mm, 0.75mm brass and 0.35mm and 0.50mm steel available).

Maximum Extruding Temperature

40 W heater and thermistor rated to 300 °C.

Hot End

Swappable V4 Hot End.

Print technology

FFF (Fused Filament Fabrication)

X/Y Motion

Independent axes with high precision linear rails guiding motion driven by kevlar reinforced belts.

Z motion

10 mm rods guide motion driven by lead screw.

Layer Resolution

0.020 - 0.350 mm (20 - 350 micron)

Print head travel speed

 80-450 mm/sec 

Ambient operation temperature

15 ˚C to 32 ˚C (59 ˚F to 90 ˚F)

Storage temperature

0 ˚C to 32 ˚C (32 ˚F to 90 ˚F)

Operating Sound

lower than 65 dBA

Machine Weight

12 kg (26.5 lbs)

Machine Dimensions with spool and full range of motion

Width x Depth x Height: 533 mm (21") x 610 mm (24") x 533 mm (21”).

shipping box dimensions

19 kg (42 lbs.). 535 mm x 535 mm x 535 mm (21" x 21" x 21”).

AC input

100 - 120 V (4 A)/220 - 240 V (2 A), 47 - 63 Hz

Power requirements

24 V DC @ 15 A

Power consumption

360 W max


The latest version of OctoPrint for MakerGear is included with the M3-SE. With no proprietary software required, the MakerGear M3-SE is compatible with a wide variety of free and commercial software programs.


Wifi, LAN, USB



- MakerGear M3-SE 3D Printer with V4 Hot End
- Power Supply with Adjustable Input Voltage (115 V or 230 V)
- Power Cord compliant with your country's power outlets
- 1 kg Spool of PLA (black)
- 8 inch x 10 inch Borosilicate Glass print surface with applied film print surface
- Tool Set
- Sample print 
- User Guide


New M3-SEs have a 12-month limited warranty and offer optional warranty extension options through the MakerGear Protection Plan.

MakerGear will replace all defective parts on M3-SEs as stipulated by warranty terms below. Replacement parts may be new or refurbished and will be shipped via FedEx Ground or USPS Priority in the US only. Exceptions – the MakerGear V4 hot-end is only covered under warranty when MakerGear filament and authentic MakerGear components are used. The twelve-month warranty does not cover machine abuse.

This website uses cookies to enhance user experience and to analyze performance and traffic on our website.