Hatchbox Wood PLA Filament 1.75mm X 1kg


Hatchbox Wood PLA Filament.  

PLA mixed with wood fibers for a wood like effect.  

This material does not require a special nozzle.  It will not cause excessive wear on a brass nozzle.  If printing with a 0.4mm nozzle, special care should be taken to ensure a good constant flow rate.  Using a 0.5mm or larger nozzle will allow you to print with finer layer heights.

Recommended Extrusion Temperature : 180°C - 210°C on most printers

Recommended Build Platform Temperature : 0 °C - 60 °C

Platform Adhesion : Blue Painters Tape (when cold) or PEI, glue, Buildtak, hairspray, etc if heated.

Related Items