Free Shipping in the Continental U.S. on Orders Over $30

NinjaTek Cheetah Semi Flexible Filament

Fenner Drives

1.75mm is .5kg on a spool

3mm is .75kg on a spool.


NinjaTek's third flexible filament.  At a shore hardness of 95A, Cheetah has about the same flexibility as SemiFlex and is a bit stiffer than Ninja.  It's a great choice where you need a lot of flex, but more structure than you get with NinjaFlex.  

This filament can be printed without modification on many printers including Bowden feeds like the Ultimakers that have difficulty with regular NinjaFlex, but adding a reinforced extruder like the E3D Titan, Aero, or Lulzbot FlexyStruder will allow you to print at faster speeds.

Extruder Temperature: 230°C – 240°C
Platform Temperature: Room temperature – 45°C
Glue or blue painters tape is suggested if not using a heated bed.**If using PEI or BuildTak, glue over the surface is a must to prevent damage**
Print Speed:
Top and bottom layers: 30-45 mm/ sec 
Infill speeds: 60-80 mm/ sec 
Layer 2+ use cooling fan if available.

Heat Deflection Temperature:  46°C






Related Items