Bondtech Raise3D SingleDirect upgrade

Bondtech


After many request for a compact, lightweight single directdrive extruder setup for the Raise3D N2 printers we are proud to present our newest product!

This product is now available for orders, expect delivery time about 1.5 to 2 weeks.
This new compact, lightweight extruder upgrade for Raise3D printers will solve your feeding problems, improves surface quality and make it possible to print with faster speeds with sustained quality.

This product uses lightweight Nema17 Pancake stepper motors combined with a 3:1 internal gearing ratio and our proven DualDrive gears.

The body parts are manufactured with SLS printing in high strength ployamide (nylon).

Drive gears are precision cnc-machined in hardened steel for maximum performance and lifetime.

This upgrade fits both the Revision 1 (casted) and Revision 2(cnc-milled) version of the printhead.

Installation is done in about 20 minutes.

Original extruder setup on Raise3D is 532g for singel setup this new upgrade is 252g with the included motor and it allows for faster printing without surface issues due to vibration during accelerations/deaccelerations.

The extruder is equipped with a push fit connectors for 4 mm guide tube that will let you connect the existing guide tube to the extruder. Tube are not included.

Plug & Play solution, no need to cut and solder wires.

Please select what type of motor you have on your printer (silver colored = older, black = newer)

Kit contains everything you need to rebuild your printer.

1 x DualDirect extruder with motors
1 x Breakout board cover

Weight: 252g
E-step value: 415
Current for motor: 0.7A (Vref setting = 0.5V)

Use newest version for Touch panel (0.9.2) to set E-steps value directly on the printer. You can download the new software here: https://www.raise3d.eu/pages/download

IMPORTANT!!
It has come to our knowledge that if the ribbon cable to the break-out board gets unplugged when the printer is turned on, thermal runway might happen, make sure that the ribbon cable is securely held in place with hotmelt or a zip tie.

Related Items