{"title":"Top Sellers","description":"","products":[{"product_id":"e3d-v6-replacement-nozzle","title":"1.75mm E3D V6 Brass nozzle replacement","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eReplacement nozzles for E3D hot end available in 0.25-0.8mm orifice for 1.75mm filament.  Note that we have moved the 3mm options \u003ca href=\"https:\/\/printedsolid.com\/collections\/ultimaker\/products\/ultimaker-compatible-brass-nozzle-by-e3d\" title=\"3mm nozzles\"\u003ehere\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eV6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger 3D prints. 1.75mm Brass V6 nozzles are fully compatible with the Prusa 3D printers.\u003c\/p\u003e\n\u003cp\u003eBrass nozzles, featuring E3D’s signature internal geometry, have optimal thermal properties for everyday printing, providing smooth layers for standard non-abrasive applications. Rated to a max temperature of 300°C.\u003c\/p\u003e\n\u003cp\u003eNote that the standard hotend is brass.  This is the best choice for most materials.  However, for abrasive materials such as carbon fiber, glow in the dark, and stainless and iron filled materials, the stainless nozzle will provide a longer life.  However, while the stainless is a longer life, it is lower thermal conductivity than brass so higher temps and\/or slower speeds may be required.\u003c\/p\u003e\n\u003cp\u003eThe large bore has been elongated to give a minimum small diameter nozzle length.  This reduces the potential for clogs.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable class=\"nozzle_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth colspan=\"1\" style=\"text-align: center;\"\u003eNozzle Size\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eID Dots\u003csup\u003e*\u003c\/sup\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.25mm\u003c\/td\u003e\n\u003ctd\u003eHighest Precision - Slower Prints\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.30mm\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.35mm\u003c\/td\u003e\n\u003ctd\u003eSlight Increase in Precision\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.40mm\u003c\/td\u003e\n\u003ctd\u003eBalanced Nozzle - Supplied by Default\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.60mm\u003c\/td\u003e\n\u003ctd\u003eOur Preferred Minimum for Wood Filled Filament\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.80mm\u003c\/td\u003e\n\u003ctd\u003eLower Precision - High Speed, Higher Strength\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003csup\u003e*\u003c\/sup\u003e Dots are machined onto the hex-flats of the nozzles for easy identification.\u003c\/p\u003e\n\u003cp\u003eSanjay did a perfect job of explaining it, so we’ll just repeat his words!\u003c\/p\u003e\n\u003cp\u003eFrom the E3D Blog:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNozzle Specificity and Identifiability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile we were in the process of going over the nozzle we thought we’d address making them easily identifiable on a per-size basis. It’s fairly obvious whether a nozzle is 1.75mm or 3mm, but telling the difference between a 0.35mm and a 0.40mm is incredibly hard, and that’s before they get covered in plastic. To that end we have added spots drilled onto the hex flats of the nozzles, the number of which corresponds to a specific size of nozzle. The more dots the bigger the nozzle. We did consider using a binary code, but decided that we didn’t need 64 different sizes of nozzles in the end – maybe one day.\u003c\/p\u003e\n\u003cp\u003eWhen a nozzle is printing it is not only outputting a stream of plastic, but also flattening it into its final \u003ca href=\"http:\/\/en.wikipedia.org\/wiki\/Stadium_(geometry)\"\u003estadium\u003c\/a\u003e cross sectional shape. The width of this printed track is wider than that of the nozzles small diameter hole, as such the nozzle tip needs to have a flat on it that is at least as wide as the widest sensible track width. Because the widest sensible track width varies depending on the nozzle diameter it logically follows that the tip flat diameter should vary with the nozzle diameter.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3dv61_large.jpg?552565902435782146\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePhwwoooar look at that proportional orifice-tip-flat relationship!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis means that with our larger 0.60mm and 0.80mm nozzles you can lay down fatter wider layers than ever before. This is great for large fast printing of super-strong objects, Nylons in particular benefit from being printed from big nozzles. Additionally you can create beautiful very glassy looking objects with big layers of PET type materials like _XT , T-Glase and Polycarbonate.  **edit:  A large diameter nozzle is also absolutely awesome for printing filled materials like woodfill and carbon fiber PLA.\u003c\/p\u003e\n\u003cp\u003eFor our smaller nozzle this means you can get even greater resolution and print smaller details and features in your objects. The smaller tip flat allows you to put down those small features and details without an over sized tip flat smudging the tracks adjacent to what is being printed.\u003c\/p\u003e\n\u003cp\u003eThese nozzles are also backward compatible with v5 and v4 so you can use them on existing hotends if you want to get some proportional orifice-tip-flat relationship goodness in your life without swapping out the whole hotend.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote: V6 style nozzles can be installed on the Original Prusa MK4\/S, CORE and XL 3D printers with the \u003ca href=\"https:\/\/www.printedsolid.com\/products\/genuine-e3d-v6-adaptor-for-prusa-mk4-xl\" rel=\"noopener\" target=\"_blank\"\u003eNextruder V6 Nozzle Adapter\u003c\/a\u003e (sold separately).\u003c\/p\u003e\n\u003ch6 style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/h6\u003e","brand":"E3D","offers":[{"title":"0.25mm","offer_id":4031238723,"sku":"4025828621","price":10.85,"currency_code":"USD","in_stock":true},{"title":"0.15mm (experimental)","offer_id":31846797132,"sku":"4025828620","price":12.85,"currency_code":"USD","in_stock":true},{"title":"0.3mm","offer_id":4031239363,"sku":"4025828622","price":8.85,"currency_code":"USD","in_stock":true},{"title":"0.4mm","offer_id":4031238979,"sku":"4025828624","price":6.85,"currency_code":"USD","in_stock":true},{"title":"0.5mm","offer_id":22308781850709,"sku":"4025828625","price":6.85,"currency_code":"USD","in_stock":true},{"title":"0.6mm","offer_id":4031239107,"sku":"4025828626","price":6.85,"currency_code":"USD","in_stock":true},{"title":"0.8mm","offer_id":4031239235,"sku":"4025828627","price":6.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/solo.jpg?v=1531101181"},{"product_id":"e3d-hot-end-kit-v6","title":"E3D V6 Hot End - 1.75mm","description":"\u003cdiv\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/ResellerLogo_2x_b4e67c91-ba87-41ca-a283-f6e1a4aca98a_large.png?v=1507905140\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1\u003eReleased in May 2014, the E3D V6 has really become the gold standard premium 3D Printer hotend upgrade.\u003c\/h1\u003e\n\u003cp\u003eWhat’s in the box:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMetal parts (heatsink, heater block, heat break, 0.4mm nozzle)\u003c\/li\u003e\n\u003cli\u003eEmbedded bowden coupling and bowden clip (1.75mm universal and 3mm bowden versions only)\u003c\/li\u003e\n\u003cli\u003ePolycarbonate fan shroud\u003c\/li\u003e\n\u003cli\u003eShort length of 2mmID X 4mmOD PTFE tube (1.75mm universal only)\u003c\/li\u003e\n\u003cli\u003e12V 30W heater cartridge  (24V available on request)\u003c\/li\u003e\n\u003cli\u003e12V fan (24V available on request)\u003c\/li\u003e\n\u003cli\u003eSemitec 100kohm thermistor, embedded in a metal cylinder for trouble free installation.\u003c\/li\u003e\n\u003cli\u003eAssorted fasteners for mounting\u003c\/li\u003e\n\u003cli\u003e750mm bowden tubing and threaded bowden adapter (Bowden versions only)\u003c\/li\u003e\n\u003cli\u003eA silicone sock to insulate the hot end and nozzle \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConsidering this vs other hot ends?  Check out this extremely informative \u003ca href=\"http:\/\/community.robo3d.com\/index.php?threads\/e3d-v6-information-installation-guides-and-review.3407\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ereview and installation guide\u003c\/a\u003e.  Also, check out this list of \u003ca href=\"http:\/\/wiki.e3d-online.com\/wiki\/E3D-v6_Documentation#Printer_Specific_Guides\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eprinter specific installation guides\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eInformation and description of some features directly from the E3D Blog:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDecreasing size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur first mission was to decrease bulk – the heatsink and the fan comprise much of the size of the hotend, with bowden fittings in the relevant versions also adding a fair bit of size up top.\u003c\/p\u003e\n\u003cp\u003eThe first target for slashing size was the heatsink. We’ve moved to a smaller diameter heatsink that is also shorter in length. By switching to a very thin cutting tool we were able to get more fins in less space and so retain sufficient surface area on the heatsink to still get good cooling out of a smaller heat sink. It’s also 30% lighter than the previous heatsink.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/compare_large.jpg?16886581229510974061\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eA comparison between the v5 heatsink (top) and the v6 (bottom).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe next vector for reduction in size was the fan duct. After much agonising over the merits of printed parts and the cost of tooling up for injection moulding we went for an injection moulded part.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/fan_large.jpg?7656102188338165990\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eWe’re \u003cem\u003ereally \u003c\/em\u003epleased with how these turned out!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe new ducts are a great deal thinner and less bulky in all directions than the previous printed versions. We had these done in polycarbonate resin too which makes them ultra tough and resistant to temperature.\u003c\/p\u003e\n\u003cp\u003eThe next area to address was the bowden couplers – we consulted with a specialist in tube coupling solutions and took inspiration from how similar things are achieved in the pneumatics industry. We managed to come across a solution so small that it would fit entirely inside of the hotend! The coupling system we’re using is exactly like the screw-in fittings we’re all used to where a collet holds the tube in place and the tubing can be released easily by simultaneously pushing in the collet and pulling out the tube, just a great deal smaller in size.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/bowden_large.jpg?134433027243934714\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eCan you see the bowden coupling on the v6 on the left? No? That’s because it is entirely contained inside the heatsink. The small black part is just the collet poking out the top because it’s in the “up” position.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor the 3mm versions the integrated couplers were a tiny bit bigger which meant that we had to deviate from our previous groovemount dimensions slightly, but because the previous coupler sat in that space anyway it shouldn’t make much difference in terms of mounting considerations.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3dother_large.jpg?5016743886598988659\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eQuite the difference!\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eA Convenient Side Effect\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause the new bowden coupling system sits entirely within the hotend this now means that there is no need for 2 separate 1.75mm products for Bowden users and Direct users. Instead we have a 1.75mm Universal product that has the internal couplers installed. Direct users just use a short length of tubing to line the filament down into the hotend, and bowden users can simply use a longer piece of tubing with a coupler to fix the other end to their extruder.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMaking it Easier\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKapton is an amazing space age material that has paved the way for innovations in electronics, aerospace and many other areas in our modern lives. It’s also a total pain in the ass. When done well it works perfectly functionally, it’s just not as clean or easy a process as we would like.\u003c\/p\u003e\n\u003cp\u003eAs To deal with the inconvenience of having to remove the fan duct by sliding it either up or down off the heatsink we have designed the new injection moulded duct so that it simply clips into place over the heatsink from the side, with a satisfying snap as it does so.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eImproving Performance for Flexible Filaments.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlexible filaments are amazing and open up a huge range of possibilities for new practical applications in 3D printing, and they’re also just plain fun. However printing them can be really hard work, especially in 1.75mm where the lower diameter of the filament results in a filament that has mechanical properties similar to that of a wet noodle. To make matters worse many of these filaments also have a certain amount of surface tack, that rubber like grippyness – great for printing things like tyres and grips, terrible when you’re trying to make it slide down an extruder neatly.\u003c\/p\u003e\n\u003cp\u003eTo solve this issue we have added the (optional) ability to run PTFE tubing all the way from your hobbed bolt\/drive gear to deep down into the hotend.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3d4_large.jpg?5241605362224602797\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e \u003cstrong\u003eThe PTFE tubing can start right up at the drive system.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3d5_large.jpg?9824565386833392518\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cb\u003eThe PTFE tubing passes right down through the heatsink\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3d6_large.jpg?8571912379237570067\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cb\u003eFinally the tubing enters the the heatbreak locating itself in a counterbore at the top of the heatbreak.\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv id=\"gallery-1\" class=\"gallery galleryid-3820 gallery-columns-3 gallery-size-thumbnail\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/Screen_Shot_2015-06-29_at_10.06.52_PM_large.png?2993797209701540322\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan\u003eThe amount of difference this makes when printing 1.75mm flexible filaments is staggering, we went from slow prints at 5-10mm\/s that would stop feeding due to buckling with terrible oozing and retract performance to printing at 20-30mm\/s with perfect reliability and retractions that were actually very effective at combatting ooze.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/Dodecachain-300x134_large.jpg?9868776969131173700\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eCheck out our our print of emett’s Rhombic Dodecahedra Chain​ printed in NinjaFlex!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis mod has several upsides for printing more standard filaments too.  Slightly flexible filaments like Nylons also benefit from improved retraction performance. Feeding in a new filament is easier as there is only a single junction where the filament has to cross from the PTFE tubing into the HeatBreak and this junction is extremely concentric and there is next to no gap between the exit hole of the tubing and the entry hole of the heatbreak. Finally friction is reduced across the board due to the PTFE lining for the majority of the filaments travel.\u003c\/p\u003e\n\u003cp\u003eIt is worth noting at this point that PTFE is never in any of the heated areas of the hotend and as such we’ve maintained our all-metal high temperature performance with no danger of plastic melting or PTFE liners cooking.\u003c\/p\u003e\n\u003cp\u003eIf for some reason you are unable or don’t want to run a tube up into your extruder and just want to use your hotend like back in the good old days that’s fine too, just trim the the PTFE tubing off flush with the top of hotend and carry on.\u003c\/p\u003e\n\u003cp\u003eAll of the above applies to the 1.75mm universal product. In 3mm it wasn’t possible to get PTFE right down into the heatbreak which means that a 3mm direct is broadly the same situation as per v5. The good news here is that flexibles are much easier to print in 3mm, which renders the PTFE lining unnecessary.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3d7_large.jpg?12004729707679297719\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eThe 3mm Direct Heatsink\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever if you really want some of that PTFE lined goodness in your 3mm hotend then you might look at getting the 3mm Bowden product instead and using it like a direct hotend, it’s much like the 1.75mm Direct hotend in that it uses a coupler that resides entirely within the heatsink and so can be mounted as a direct hotend with the small caveat that it diverges a little from our other groovemounting dimensions to accomodate the larger internal coupler.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3d8_large.jpg?11836192047989906405\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eThe 3mm Direct HeatSink and its embedded coupler\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eShortening Heat-Up Times and Increasing Temperature Control Performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur new heater blocks do away with the previous set-screw that locked the heater in place and instead use a radically different approach where the heater block wraps around cartridge and is clamped into place by tightening a screw which physically deforms the heater block so it wraps tightly all the way around the heater for the best possible thermal contact.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3d9_large.jpg?17110581623991668584\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eThe 3mm Direct HeatSink and its embedded coupler\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you look carefully you can the slight deformation of the block.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNext we looked at how we placed the thermistor, the idea here is to have the thermistor be as representative of the temperature of the plastic in the hotend. This means going deep into the block and getting as cozy as possible with the nozzle.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3d10_large.png?7978840444142368447\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eWe’re using the same old Semitec 104GT2 thermistor as in v5, which a some people dislike because of it’s small size, while we can appreciate they are ever so slightly harder to work with than their larger cousins they have some tangible benefits. The small glass bead has an extremely fast thermal response, the thermal time constant of the much loved (but now discontinued) Epcos 100K thermistor is 2.5x slower than the Semitec. The second clear advantage the Semitec has over the Epcos is they are much more consistent in their physical size, this means we can place them in a closely toleranced hole for the best thermal contact.\u003c\/p\u003e\n\u003cp\u003eAll this adds up to some really tangible gains in temperature control – we can go from a cold start to 200C in 65s and be settled at steady temperature only a few seconds later. Temperature swings are extremely small, less than half a degree.\u003c\/p\u003e\n\u003cp\u003eWe’ve kept the same basic thermodynamics from v4 and v5 that involves a super sharp thermal break. We’ve done some deeper thermal analysis of heat flow and temperature gradients surrounding the crucial transition area of the break, but this all simply led us to the conclusion that things were already correct and no changes were needed.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3d11_large.png?10205053683532296400\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eA capture of a thermal simulation of the heatbreak at 250C.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eAs you can see the hot side is hot, and the cold side is cold.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAddressing Reliability Head On\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlthough the vast majority of users are printing away hapilly in all materials including PLA we’re still seeing the occasional failure crop up. Most of the time this is something environmental such as a lack of cooling, dodgy filament or configuration issues, however we are seeing the odd user still struggle when they’re doing all the right things and all their problems go away when we replace the hotend.\u003c\/p\u003e\n\u003cp\u003eThese problems invariably come down to two components, the HeatBreak and the Nozzle.\u003c\/p\u003e\n\u003cp\u003eThe HeatBreak is a critical component as it is where filament makes the transition from a rigid solid to a viscous liquid. When the filament is halfway through these states it can take on a sticky rubbery form that wants to adhere to the HeatBreak, this is particularly true with PLA. If a HeatBreak has a critical imperfection in the areas where the filament is in its sticky state then this can cause jamming.\u003c\/p\u003e\n\u003cp\u003eSo after much experimentation we came up with a good, reliable way of ensuring a high quality surface deep into a 2mm diameter hole in stainless steel. This removes any chance for imperfections which plastic in it’s sticky state may cling to.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3d12_large.jpg?4343687688690338754\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eA view of a heatbreak that has been cut in half to analyse internal surface finish.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe opted to only finish the portion of the HeatBreak that comes into contact with warm filament. The image above demonstrates the new finish on the heated side of the break (left), it is worth noting that in the production version the improved surface extends a good bit further to the right into the cold side of the break in order to account for retractions.\u003c\/p\u003e\n\u003cp\u003eThe next area we looked at was the nozzles, 1.75mm Bowden users were experiencing notably more issues than others and thanks to some very in-depth detective work by Michael Hackney this was linked with the length of the small diameter hole in the very tip of the nozzle. If the length of that small diameter hole was reduced then the issue went away. We’ve shortened the length of that final hole in our nozzles in v6 significantly and also upped the tolerances to which that hole length is drilled in order to reduce variance in that crucial dimension.\u003c\/p\u003e\n\u003cp\u003eWe have competing theories at E3D about what exactly makes the problem more prevalent among the 1.75mm Bowden users compared to 1.75mm Direct users – remember that the heatbreak and nozzle of the v5 1.75mm Bowden products and the v5 1.75mm Direct are identical and taken from the same batch. What we do know for sure is that the fix works.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eNozzle Specificity and Indentifiability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile we were in the process of going over the nozzle we thought we’d address making them easily identifiable on a per-size basis. It’s fairly obvious whether a nozzle is 1.75mm or 3mm, but telling the difference between a 0.35mm and a 0.40mm is incredibly hard, and that’s before they get covered in plastic. To that end we have added spots drilled onto the hex flats of the nozzles, the number of which corresponds to a specific size of nozzle. The more dots the bigger the nozzle. We did consider using a binary code, but decided that we didn’t need 64 different sizes of nozzles in the end – maybe one day.\u003c\/p\u003e\n\u003cp\u003eWhen a nozzle is printing it is not only outputting a stream of plastic, but also flattening it into its final \u003ca href=\"http:\/\/en.wikipedia.org\/wiki\/Stadium_(geometry)\"\u003estadium\u003c\/a\u003e cross sectional shape. The width of this printed track is wider than that of the nozzles small diameter hole, as such the nozzle tip needs to have a flat on it that is at least as wide as the widest sensible track width. Because the widest sensible track width varies depending on the nozzle diameter it logically follows that the tip flat diameter should vary with the nozzle diameter.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3dv61_large.jpg?4343687688690338754\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePhwwoooar look at that proportional orifice-tip-flat relationship!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis means that with our larger 0.60mm and 0.80mm nozzles you can lay down fatter wider layers than ever before. This is great for large fast printing of super-strong objects, Nylons in particular benefit from being printed from big nozzles. Additionally you can create beautiful very glassy looking objects with big layers of PET type materials like \u003ca href=\"https:\/\/printedsolid.com\/shop\/175-3\/xt-amphora\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e_XT\u003c\/a\u003e ,\u003ca href=\"https:\/\/printedsolid.com\/shop\/175-3\/colored-taulman-t-glase-3d-printing-filament\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eT-Glase\u003c\/a\u003e and Polycarbonate.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3d13_large.jpg?11978362459146648401\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eTaulman t-glase – Scripted Vase by hakalan.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor our smaller nozzle this means you can get even greater resolution and print smaller details and features in your objects. The smaller tip flat allows you to put down those small features and details without an over sized tip flat smudging the tracks adjacent to what is being printed.\u003c\/p\u003e\n\u003cp\u003eThese nozzles are also backward compatible with v5 and v4 so you can use them on existing hotends if you want to get some proportional orifice-tip-flat relationship goodness in your life without swapping out the whole hotend.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis Product has been updated with new variants you now have the ability to directly select your Direct or Bowden and your voltage 12v or 24v.\u003c\/p\u003e\n\u003cp\u003eAdded Prusa variant as well this is the 24v Direct Drive kit with a Prusa Heater and Prusa thermistor the Prusa variant is for the MK3 Only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"E3D","offers":[{"title":"1.75mm \/ Direct Drive 24v","offer_id":22124184600661,"sku":"B07F3F57F6","price":54.8,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ Direct Drive 12V (EOL)","offer_id":4032407555,"sku":"8000020900","price":54.8,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ Bowden 24v","offer_id":22124029083733,"sku":"B07CN8JP47","price":59.8,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ Bowden 12V (EOL)","offer_id":4032407619,"sku":"B079H32Y6M","price":59.8,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ Pre-Assembled Direct  12V (EOL)","offer_id":32442531148,"sku":"7025854879","price":74.8,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ Pre-Assembled Direct Drive 24V","offer_id":22399985156181,"sku":"7025854878","price":74.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/v6-whole-web-1000.jpg?v=1516303656"},{"product_id":"e3d-volcano-add-on","title":"E3D Volcano Eruption Pack (EOL)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eVolcano – Print Faster, Stronger, Bigger.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe’ve been a big fan of large diameter nozzles since our friends at colorFabb convinced us to beta test the (sadly never released) woodFill coarse with a 0.8mm nozzle.  Since then, we’ve stocked larger nozzles for the E3D as upgrades for other big hot end converts.\u003c\/p\u003e\n\u003cp\u003eE3D has taken it a step further!\u003c\/p\u003e\n\u003cp\u003eUpgrade the capabilities of your \u003ca href=\"https:\/\/printedsolid.com\/shop\/e3d\/e3dv6\/\"\u003eE3D V4, V5, or V6\u003c\/a\u003e compatible hotend to enable faster stronger prints.\u003c\/p\u003e\n\u003cp\u003eEverything you need to start exploring large format 3D-Printing! The Eruption Pack is an add on for your E3D HotEnd to boost the speed of printing with vastly increased melt rates and epic layer adhesion. Another fun addition to the E3D ecosystem, and fully compatible with all E3D HotEnds except Cyclops.\u003c\/p\u003e\n\u003cp\u003eThe Eruption Pack gives you an easy way to upgrade your HotEnd with a full suite of nozzles. This kit contains all the parts you need to upgrade your HotEnd to Volcano, including electronics and fixings. The Eruption Pack adds the full range of nozzle sizes to your Volcano:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.60mm\u003c\/li\u003e\n\u003cli\u003e0.80mm\u003c\/li\u003e\n\u003cli\u003e1.00mm\u003c\/li\u003e\n\u003cli\u003e1.20mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eVolcano is E3D’s answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need.\u003c\/p\u003e\n\u003cp\u003eVolcano enables you to print at high layer heights, through large nozzles, and extrude much more plastic per second. This results in dramatically reduced print times.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/volcanoprint_large.png?17923950925026829694\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eIn addition to reduced print time the large traces of filament printed by Volcano bond to one another with greatly improved strength. This results in parts that are extremely strong and feel much more solid than standard prints.\u003c\/p\u003e\n\u003cp\u003ePrinters are getting larger and the objects that can be printed are getting larger too. However, as prints get bigger the time taken to print these objects increases exponentially. Volcano makes huge printers viable, and manufacturing large objects much more efficient by slashing print times by more than half compared to standard printing.\u003c\/p\u003e\n\u003cp\u003eBy combining speed and strength Volcano makes it possible to print objects a whole new class of objects like shelf brackets, large scale RepRap machines, and even furniture.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/volcanoprint2_large.jpg?787354149027159702\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan\u003eJust because parts are printed with large layers doesn’t mean that they are going to be inaccurate or ugly. To the contrary the large layers give a very smooth appearance, with great gloss. With a correctly calibrated machine you can stil hit part accuracies of +\/- 0.1mm.\u003c\/span\u003e\u003c\/p\u003e","brand":"E3D","offers":[{"title":"1.75mm \/ 12v (EOL)","offer_id":22308599791701,"sku":"B07NCXWKC6","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 24v (EOL)","offer_id":22308601987157,"sku":"B07NCYKQ4Z","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/Eruption_94093e5b-b360-444d-9fa4-8a11e0b03168.png?v=1507909756"},{"product_id":"gift-card","title":"E-Gift Certificate","description":"\u003cp\u003eNot sure what to get for the 3D Printing Enthusiast on your list?  We understand.  It's hard to pick out a gift for someone who has the ability to make whatever they want!\u003c\/p\u003e\n\u003cp\u003eGive them the gift of choice and the power to expand that hobby with a Printedsolid.com Gift Card.\u003c\/p\u003e\n\u003cp\u003eGift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.\u003c\/p\u003e","brand":"Printed Solid","offers":[{"title":"$200.00","offer_id":977918427148,"sku":"","price":200.0,"currency_code":"USD","in_stock":true},{"title":"$100.00","offer_id":4175117059,"sku":"","price":100.0,"currency_code":"USD","in_stock":true},{"title":"$50.00","offer_id":4175116995,"sku":"","price":50.0,"currency_code":"USD","in_stock":true},{"title":"$35.00","offer_id":21185483767893,"sku":"","price":35.0,"currency_code":"USD","in_stock":true},{"title":"$25.00","offer_id":4175116931,"sku":"","price":25.0,"currency_code":"USD","in_stock":true},{"title":"$10.00","offer_id":4175116867,"sku":"","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/PS-Knight1.png?v=1577117730"},{"product_id":"e3dhardenednozzle","title":"E3D Hardened Steel Nozzle for Abrasive Filament - Single - 1.75mm","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLooking for a nozzle solution that will let you print through large amounts of abrasive filaments such as carbon fiber, iron, glow in the dark, or glass filled materials without any wear?  \u003c\/p\u003e\n\u003cp\u003eE3D has done some great studies to determine that printing with as low as even 250g of carbon fiber filled filament can damage the nozzle.  \u003c\/p\u003e\n\u003cp\u003eThey have developed this hardened steel nozzle as a solution.  \u003c\/p\u003e\n\u003cp\u003eIt is available in 0.25mm, 0.4mm, and 0.8mm sizes as well as 0.8mm \u003c\/p\u003e\n\u003cp\u003eNeed 1.75 Hardened Steel Nozzle Look Here!\u003cbr\u003e\u003ca href=\"https:\/\/www.printedsolid.com\/products\/e3dhardenednozzle\"\u003ehttps:\/\/www.printedsolid.com\/products\/e3dhardenednozzle\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/BrassHardComparisonWeb-1000x1000_large.jpg?12114979185075375015\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe cross sectioned nozzle on the left is brass and has printed 250g of carbon fiber filled filament.  The cross sectioned nozzle on the right is hardened steel and has printed over 2500g (2.5kg) of carbon fiber filled filament with no significant wear.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eNote: V6 style nozzles can be installed on the Original Prusa MK4\/S, CORE and XL 3D printers with the \u003ca href=\"https:\/\/www.printedsolid.com\/products\/genuine-e3d-v6-adaptor-for-prusa-mk4-xl\" rel=\"noopener\" target=\"_blank\"\u003eNextruder V6 Nozzle Adapter\u003c\/a\u003e (sold separately).\u003c\/div\u003e\n\u003ch6 style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/h6\u003e","brand":"E3D","offers":[{"title":"1.75mm \/ 0.25mm","offer_id":7434731523,"sku":"4025828652","price":19.85,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 0.3mm EOL","offer_id":22531482910805,"sku":"4025828653","price":19.85,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 0.35mm EOL","offer_id":22531491594325,"sku":"4025828654","price":19.85,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 0.4mm","offer_id":7434731715,"sku":"4025828655","price":19.85,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 0.8mm","offer_id":7434731907,"sku":"4025828658","price":19.85,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 0.6mm","offer_id":31780963212,"sku":"4025828657","price":19.85,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 0.5mm","offer_id":22263969382485,"sku":"4025828656","price":19.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/v6_hs_05_1_753c3cc6-7897-4721-8214-3a8521faf8ea.jpg?v=1531101290"},{"product_id":"lite6","title":"E3D Lite6 Budget Hot End Kit (EOL)","description":"\u003ch1\u003eE3D Lite 6 Budget Hot End Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eA lower temperature rated version of the popular E3D V6 for 3D Printer users that want a good quality hot end, but don't need the high temp performance of the V6.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSome notes:  This comes with the standard E3D cartridge style Semitec 100k thermistor and silicone sock.  If you have a printer that is not readily compatible with that style, let us know and we can include the older style heater block instead.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan\u003eAssembly guidelines for Lite6 can be found \u003ca href=\"http:\/\/wiki.e3d-online.com\/wiki\/E3D-Lite6_Assembly\" target=\"_blank\" title=\"E3D Lite6 Hot End Assembly\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003eFrom the manufacturer:\u003c\/h2\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eWe know that not everybody needs the all-metal high-temperature performance of an E3D-v6. We’ve come to realize that there exists a need for a hotend that is reliable, and puts out great prints, but meets the budget of those who are just getting started in 3D printing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLite6 is our answer to that need. By adopting a PTFE lined, “Mostly Metal” design we’re able to meet what we think is a really awesome price point.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/e3d-online.com\/image\/data\/Lite6\/Lite6_400px.jpg\"\u003e\u003cbr\u003e\u003cstrong\u003eLite6 Assembled\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLite6 does not supersede v6 - more compliments it, think of Lite6 as v6’s little brother. It’s a lower cost hotend, with a more modest specification, but still a great option for beginners and those on a budget. Read on to find out the key differences and features.\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ctable class=\"comp_tbl\" cellspacing=\"1\" cellpadding=\"1\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e\u003c\/th\u003e\n\u003ctd\u003eV6\u003c\/td\u003e\n\u003ctd\u003elite6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003e\n\u003ch3\u003ePrint Performance\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax Temp\u003c\/th\u003e\n\u003ctd\u003e\n\u003cp\u003e\u0026gt;400°C\u003cbr\u003e(Any thermoplastic)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e245°C\u003cbr\u003e(e.g. PLA \u0026amp; ABS)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSpeed\u003c\/th\u003e\n\u003ctd\u003e20-100mm\/s\u003c\/td\u003e\n\u003ctd\u003e20-50mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEase of Use\u003c\/th\u003e\n\u003ctd\u003eIntermediate\u003c\/td\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFilament DIameter\u003c\/th\u003e\n\u003ctd\u003e1.75mm or 3mm\u003c\/td\u003e\n\u003ctd\u003e1.75mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBowden\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVolcano\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eV6-Nozzles\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp class=\"subtitle\"\u003e\u003cstrong\u003eAimed at printing everyday materials.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLite6 cannot offer the same high-temperature performance as E3D-v6, which means that you can’t print higher-performance engineering plastics like Nylon, Polycarbonate, and ColorFabb Carbon-Fiber XT. The PTFE liner in Lite6 means that there is a temperature limit of 240C. With all of the above said, Lite6 is aimed at the more standard materials, such as ABS and PLA, and it really does produce beautiful looking prints with outstanding reliability. The full length PTFE liner also means you get great performance with flexible materials like NinjaFlex.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/e3d-online.com\/image\/data\/Lite6\/Lite6_prints.jpg\" target=\"_new\"\u003e\u003cimg src=\"http:\/\/e3d-online.com\/image\/data\/Lite6\/Lite6_prints_500px.jpg\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eSome nice E3D-Lite6 prints in PLA and ABS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLite6 has a slightly shorter effective melt-zone than v6, which does mean that print speeds are more modest, but still completely appropriate for all but the very fastest of 3D printers on the market. If you do need to get more speed from your machine then you can of course upgrade to either Volcano or v6 with ease.\u003c\/p\u003e\n\u003cp class=\"subtitle\"\u003e\u003cstrong\u003eA range of versions for most users.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to keep costs down we are offering Lite6 in 1.75mm filament diameter only, which meets the needs of the majority of users. Just like the 1.75mm E3D-v6 we have used our integrated bowden coupling system, which means that Lite6 is suitable for use as a direct or a bowden hotend right out of the box. We also have 24v and 12v electronics on offer to support as many machines as possible.\u003c\/p\u003e\n\u003cp class=\"subtitle\"\u003e\u003cstrong\u003eExceptional Reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe metal bodied construction of Lite6 the hotend makes it incredibly robust and tolerant of accidents that new users inevitably encounter. If you accidentally crash your Lite6 into a print there is effectively zero chance of it breaking. Unlike hotends constructed with PEEK bodies Lite6 is also very tolerant of overheating accidents. Although the PTFE liner may be damaged by the heat, there is no PEEK insulator to melt into a puddle of molten polymer. The stainless steel parts are incredibly thermally robust and essentially impossible to damage with the supplied heater. This means that in the event of cooking your PTFE liner you can quickly and easily swap it out for a new one and return your Lite6 to full functionality. New PTFE liners cost only $3 including shipping!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/e3d-online.com\/image\/data\/Lite6\/Lite6_Cutaway_400px.jpg\"\u003e\u003cbr\u003e\u003cstrong\u003eLite6 cutaway showing PTFE liner in blue\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe’ve also re-used as many parts from v6 and the rest of the E3D-Ecosystem as possible, the beautiful polycarbonate fan duct, the proven 30mm ball bearing cooling fan. Most importantly we’re using the same highly optimised nozzles and heater blocks. This means that we’re using tried and tested v6 components to deliver great performance in the most important areas of Lite6.\u003c\/p\u003e\n\u003cp class=\"subtitle\"\u003e\u003cstrong\u003eRenowned Customer Support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe’re proud of the fact that customers frequently make positive comments about our customer support. Like all E3D products, you can expect to receive proper support for any questions you might have, as well as the reassurance that if something is wrong, we’ll make it right. More than you could hope to expect from the cloners.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\"Great Support and product .. Ty to Bonnie for support =) ...\"\u003c\/span\u003e - Jerem (Feb 2015)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\"... E3d has GREAT costumer support. Top notch company. You will not regret ordering from them.\"\u003c\/span\u003e - Scott Robel (Jan 2015)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\"... excellent customer service when I emailed with my questions ...\"\u003c\/span\u003e - Hernandez (Nov 2014)\u003c\/p\u003e\n\u003cp\u003eThank you guys for your kind comments - it's always appreciated!\u003c\/p\u003e\n\u003ch2\u003eNew, Lower Price\u003c\/h2\u003e\n\u003cp class=\"subtitle\"\u003e\u003cstrong\u003eLow cost, high quality.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe were concerned that we needed to create something that was low cost, but not low quality. By using a PTFE liner, we are able to relax our need for aggressive thermodynamic control of thermodynamics that is needed in v6. The mostly metal construction and use of E3D-v6 nozzles means that you do not lose out on print quality. The PTFE liner reduces required manufacturing tolerances and contributes to Lite6's exceptional reliability.\u003c\/p\u003e\n\u003cp\u003eThe core component of Lite6 that makes it different from it’s more capable sibling the E3D-v6 is the new stainless steel heat-sink (a concept that will horrify anyone with a keen understanding of thermodynamics). This means we were able to replace our previous two component system of a stainless heat-break (which are extremely expensive to manufacture), and our aluminium heatsink. This does mean that Lite6 is a touch heavier than v6, with 22g more weight due to stainless being considerably heavier than aluminium.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp class=\"subtitle\"\u003e\u003cstrong\u003eDesigned for manufacture.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe very very carefully designed the Lite6 heatsink with a specific lathe in mind, using a specific set of tooling. We almost spent more time thinking about the GCODE that the CNC lathe would run, the order of operations, and the cost implications of each operation than we did on the initial design - which, frankly, is boringly simple!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg src=\"http:\/\/e3d-online.com\/image\/data\/Lite6\/GCodes.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003ch2\u003eWhy is E3D creating a mid range hotend?\u003c\/h2\u003e\n\u003cp class=\"subtitle\"\u003e\u003cstrong\u003eLow cost doesn’t have to mean a poor user experience.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe’re known for our all metal high performance hotends, and advanced multi-material extrusion systems. However we see a constant stream of users who come to us after purchasing a hotend, or machine with a hotend already fitted, where the hotend has either completely failed, or has very poor performance and reliability. Particularly low quality clones of genuine products which just haven’t been manufactured properly, and also hotends that have intrinsic design flaws. Some of the products out there are simply dangerous too. The status quo just did not seem acceptable to us. We wanted to take our expertise in manufacturing and hotend design and create an entry level product for new users or users with a lower budget, but still offer an assured level of performance and reliability.\u003c\/p\u003e\n\u003cp class=\"subtitle\"\u003e\u003cstrong\u003eA Hotend option that grows with your needs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe also wanted to allow people who are starting out at a lower budget to have the ability to easily upgrade in the future, so that when the time comes to boost the performance of their printer they don’t have to print a new extruder, or reconfigure their printer. This provides a nice stepping stone into the world of 3D printing with a hotend that has the capability to increase it’s performance according the the users needs, budget and experience.\u003c\/p\u003e\n\u003cp class=\"subtitle\"\u003e\u003cstrong\u003eEcosystem\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Lite6 is the latest addition to the v6 ecosystem and because it shares core components and key dimensions with the E3D-v6 you know that your investment is for the long term.\u003c\/p\u003e\n\u003cp\u003eThe full range of replaceable v6 nozzles are available to Lite6 allowing you to keep a selection of nozzles in your printing arsenal which you can easily swap in and out depending on the application.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/e3d-online.com\/image\/data\/v6\/400px\/Series.jpg\"\u003e\u003cbr\u003e\u003cstrong\u003eEver growing range of V6 Nozzles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs well as being able to use standard v6 nozzles, you can also upgrade to Volcano giving you unprecedentedly fast printing capabilities with exceptionally high strength.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/e3d-online.com\/image\/data\/Lite6\/Volcano_Block_Nozzles_Close_500px.jpg\"\u003e\u003cbr\u003e\u003cstrong\u003eNozzle Range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause the Lite6 has exactly the same external dimensions as v6 - any mounts that are available for v6 will work with Lite6. Furthermore, when you are ready to upgrade to a full-blown v6, and unlock the full high-temperature performance of your core components you can simply buy the upgrade pack and make the easy switch - you won’t even need to change your HotEnd mount or re-wire your electronics.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis Kit Includes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined Lite6 Heat sink\u003c\/li\u003e\n\u003cli\u003eE3d .4 Nozzle\u003c\/li\u003e\n\u003cli\u003eE3d Aluminum Heatblock with Fixing kit\u003c\/li\u003e\n\u003cli\u003e750mm PTFE Bowden Tube\u003c\/li\u003e\n\u003cli\u003eBowden Tube Connector\u003c\/li\u003e\n\u003cli\u003e12\/24v 30w Heater Cartridge\u003c\/li\u003e\n\u003cli\u003eE3d Thermistor\u003c\/li\u003e\n\u003cli\u003eRed Heatsink fan Shroud\u003c\/li\u003e\n\u003cli\u003e12\/24v Heatsink Fan\u003c\/li\u003e\n\u003cli\u003eExtension Wires x2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Direct Drive \/ 12v (EOL)","offer_id":22338119106645,"sku":"7025854827","price":19.9,"currency_code":"USD","in_stock":false},{"title":"Direct Drive \/ 24v (EOL)","offer_id":22338121400405,"sku":"7025854829","price":19.9,"currency_code":"USD","in_stock":true},{"title":"Bowden Drive \/ 12v (EOL)","offer_id":22338121433173,"sku":"7025854828","price":22.4,"currency_code":"USD","in_stock":false},{"title":"Bowden Drive \/ 24v (EOL)","offer_id":22338121465941,"sku":"7025854830","price":22.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/E3D_Lite6_3DPrinting_HotEnd_175.jpg?v=1471363419"},{"product_id":"pt100-total-upgrade-kit","title":"PT100 Total Upgrade Kit","description":"\u003ch1\u003e\u003cspan\u003ePT100's are \u003cstrong\u003e high temperature, high accuracy\u003c\/strong\u003e temperature sensors that make a great upgrade to your E3D or similar hot end.  \u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eThis kit provides all that you need to convert you E3D hot end over to PT100 temperature measurement.  The PT100 provides accuracy up to 400C.  These sensors are also very easy to handle, being of a \u003cstrong\u003emetal cartridge construction\u003c\/strong\u003e that is secured with a set screw, no more fiberglass sleeving or clamping washer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you want experiment with printing the \u003cstrong\u003ecrazy high temperature materials\u003c\/strong\u003e, get more accurate temperature readings, and have a much more robust and\u003cstrong\u003e easy to assemble\u003c\/strong\u003e temperature sensor then a PT100 is an ideal option.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a kit that provides\u003cstrong\u003e everything you need to get up and running\u003c\/strong\u003e with a PT100 sensor on most machines. Requires a controller board that is running Marlin or Repetier with a spare analog input pin.\u003c\/p\u003e\n\u003cp\u003eThis kit contains a PT100 sensor, a heater block that is compatible with that sensor, an electrical amplifier board to connect the PT100 to your printer controller board, and the required screws for holding everything together. This kit is compatible with all E3D HotEnds except for Cyclops.\u003c\/p\u003e\n\u003cp\u003eThis upgrade is also compatible with the Hexagon hot end.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"V5\/V6\/Chimera\/Kraken","offer_id":15551649734,"sku":"7025854890","price":19.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/PT100-upgrade-kit-new-1000x1000.gif?v=1471363880"},{"product_id":"stepper-motor","title":"E3D Stepper Motor - Compact but Powerful","description":"\u003cul\u003e\n\u003cli\u003eNEMA 17.\u003c\/li\u003e\n\u003cli\u003e0.9° Step Angle.\u003c\/li\u003e\n\u003cli\u003e400 Steps Per Revolution.\u003c\/li\u003e\n\u003cli\u003e2.8V Rated Voltage.\u003c\/li\u003e\n\u003cli\u003e1.68A Phase.\u003c\/li\u003e\n\u003cli\u003e3.5kg\/cm (48.6oz\/in) Holding Torque.\u003c\/li\u003e\n\u003cli\u003e40mm Body.\u003c\/li\u003e\n\u003cli\u003e5mm Output Shaft.\u003c\/li\u003e\n\u003cli\u003eCable included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/motors-range-new_3_large.jpg?v=1516994344\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":20498948486,"sku":"4058277205","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/compactbutpowerful2.jpg?v=1516994354"},{"product_id":"e3d-silicone-socks-3-pack","title":"E3D Silicone Socks 3 Pack New Design","description":"\u003ch1\u003eKeep your 3D Printer's heater block and nozzle clean and warm with these silicone socks.  \u003c\/h1\u003e\n\u003cp\u003eNOTE:  This is the 5\/17 revision of the silicone sock design.  It has been modified to allow a bit more of the nozzle to be exposed.  This will give a longer life at the expense of a slightly poorer thermal insulation.  It is the right design for 90% of users, but if you know you need the higher insulation of the original sock, it is available \u003ca href=\"https:\/\/printedsolid.com\/products\/e3d-silicone-socks-pro-original\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis product is compatible with the E3D cartridge style heater block on the V6.  If you have an older bead style heater block, we have an upgrade kit available \u003ca href=\"https:\/\/printedsolid.com\/products\/e3d-silicone-sock-upgrade-package\" title=\"Heater block, sock, and cartridge thermistor upgrade kit\"\u003ehere\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003eFor those who have printed with copolyesters like \u003ca href=\"https:\/\/printedsolid.com\/products\/colored-colorfabb-xt-made-with-eastman-amphora-polymer\" title=\"colorFabb XT 3D Printing Filament\"\u003ecolorFabb XT\u003c\/a\u003e, you know that if you don't nail the settings absolutely dead on, the nozzle can pick up little bits of material throughout the print.   The bits collect until they are big enough to be dropped off in a gooey char blob.  Doesn't usually matter much for function, but for looks it's not great.  \u003c\/p\u003e\n\u003cp\u003eThe silicone socks help to address that issue with a non-stick surface that covers most of the nozzle and heater block leaving only the end of the nozzle sticking out.  \u003c\/p\u003e\n\u003cp\u003eThe sock also provides the additional benefit of insulating your heat source.  This allows for more cooling of your print for better bridges and overhangs without the concern of accidentally cooling your nozzle and causing temperature fluctuations (or the dreaded temp fall error).  It also insulates your part from the heat generated from the heater block which will cause some improvement in quality.  \u003c\/p\u003e\n\u003cp\u003eIt is expected that this sock may become worn or damaged over time, and they're cheap enough that the shipping is more than the cost of one piece, so we've bundled them into multi packs.  Your future self will thank us.\u003c\/p\u003e\n\u003cp\u003eExample of how the sock fits on the hot end\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/IMG_99782-1000x1000_large.JPG?v=1497790947\" alt=\"E3D Silicone Sock\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eNozzle fit in sock. One sock fits all nozzle.  \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":47791822092,"sku":"7025854899","price":7.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/new_sock.JPG?v=1497790975"},{"product_id":"e3d-silicone-socks-pro-original","title":"E3D Silicone Socks 3 Pack Pro \/ Original","description":"\u003ch1\u003eKeep your 3D Printer's heater block and nozzle clean and warm with these silicone socks.  \u003c\/h1\u003e\n\u003cp\u003eNote:  This is the original style Silicone Sock that covers up to the very tip of the nozzle.  If you're looking for the newer style with a more exposed nozzle, check \u003ca href=\"https:\/\/printedsolid.com\/products\/e3d-silicone-socks-3-pack\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis product is compatible with the E3D cartridge style heater block on the V6.  If you have an older bead style heater block, we have an upgrade kit available \u003ca href=\"https:\/\/printedsolid.com\/products\/e3d-silicone-sock-upgrade-package\" title=\"Heater block, sock, and cartridge thermistor upgrade kit\"\u003ehere\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003eFor those who have printed with copolyesters like \u003ca href=\"https:\/\/printedsolid.com\/products\/colored-colorfabb-xt-made-with-eastman-amphora-polymer\" title=\"colorFabb XT 3D Printing Filament\"\u003ecolorFabb XT\u003c\/a\u003e, you know that if you don't nail the settings absolutely dead on, the nozzle can pick up little bits of material throughout the print.   The bits collect until they are big enough to be dropped off in a gooey char blob.  Doesn't usually matter much for function, but for looks it's not great.  \u003c\/p\u003e\n\u003cp\u003eThe silicone socks help to address that issue with a non-stick surface that covers most of the nozzle and heater block leaving only a little bit of the end of the nozzle sticking out.  \u003c\/p\u003e\n\u003cp\u003eThe sock also provides the additional benefit of insulating your heat source.  This allows for more cooling of your print for better bridges and overhangs without the concern of accidentally cooling your nozzle and causing temperature fluctuations (or the dreaded temp fall error).  It also insulates your part from the heat generated from the heater block which will cause some improvement in quality.  \u003c\/p\u003e\n\u003cp\u003eIt is expected that this sock may become worn or damaged over time, and they're cheap enough that the shipping is more than the cost of one piece, so we've bundled them into multi packs.  Your future self will thank us.\u003c\/p\u003e\n\u003cp\u003eExample of how the sock fits on the hot end\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"E3D Silicone Boot on Hot End\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/Sock-Header1-1000x1000_large.jpg?v=1472607991\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eNozzle fit in sock. One sock fits all nozzle.  \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/silicone-one-size-fits-all-1000x1000_large.jpg?v=1472608117\" alt=\"E3D Silicone Sock on Nozzle - One size fits all.\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":47791844684,"sku":"7051196719","price":7.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/Sock-Product-1000x1000_06d887d7-8138-4256-98d6-734aed86171d.jpg?v=1497790584"},{"product_id":"e3d-volcano-silicone-socks-multi-pack","title":"E3D Volcano Silicone Socks - Multi Pack","description":"\u003ch1\u003eKeep your 3D Printer's heater block and nozzle clean and warm with these silicone socks.  Custom design for the E3D Volcano.\u003c\/h1\u003e\n\u003cp\u003eThis product is compatible with the E3D cartridge style heater block on the Volcano.  \u003c\/p\u003e\n\u003cp\u003eThe sock provides the additional benefit of insulating your heat source.  This allows for more cooling of your print for better bridges and overhangs without the concern of accidentally cooling your nozzle and causing temperature fluctuations (or the dreaded temp fall error).  It also insulates your part from the heat generated from the heater block which will cause some improvement in quality.  \u003c\/p\u003e\n\u003cp\u003eIt is expected that this sock may become worn or damaged over time, and they're cheap enough that the shipping is more than the cost of one piece, so we've bundled them into multi packs.  Your future self will thank us.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":47791854796,"sku":"7051196722","price":4.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/VOLC-SOCK_2_-1000x1000.jpg?v=1499004346"},{"product_id":"adjustable-spool-roller-kit","title":"Next Gen Adjustable Spool Roller Kit","description":"\u003cp\u003eOne spool roller to rule them all.  \u003c\/p\u003e\n\u003cp\u003eWe designed this spool holder for use in our own shop and thought we'd share it with the world.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis spool holder is a kit of CNC milled Aluminum Composite Material, fasteners, bearings, and optionally, a printed roller shaft (or save a few bucks and print your own \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca title=\"STL File for Shaft\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/spool-holder-bearing-singleV2.stl?4271912731861940491\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e).  \u003c\/p\u003e\n\u003cp\u003eInstructions are \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/Spooler_assembly.pdf?v=1600285807\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ehere\u003c\/strong\u003e\u003c\/span\u003e.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBy simply adjusting the shaft position, this one spool roller can adapt from holding 12\" 2.3kg spools all the way down to tiny one pound spools.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Printed Solid","offers":[{"title":"White \/ Yes add 3D Printed Part","offer_id":32733227188309,"sku":"PS-Spooler-2","price":25.0,"currency_code":"USD","in_stock":true},{"title":"White \/ No","offer_id":32733227221077,"sku":"PS-Spooler-3","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Yes add 3D Printed Part","offer_id":32733227253845,"sku":"PS-Spooler-4","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ No","offer_id":32733227286613,"sku":"PS-Spooler-5","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/IMG_0819.png?v=1600285759"},{"product_id":"capricorn-xs-reduced-friction-bowden-tubing","title":"Capricorn XS Reduced Friction Bowden Tubing 1.75mm","description":"\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003ePTFE, or Polytetrafluoroethylene, is a synthetic polymer commonly used as a coating for non-stick pots and pans. It is the slipperiest substance known to man, and is said to be the only surface to which a gecko cannot stick. Although Bowden tubes can be made from several different polymers, PTFE is generally considered the best because of its high melting point and low coefficient of friction. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1.75mm Bowden tubing, because of its small diameter, is made with an expensive paste extrusion process. Very precise equipment is needed to obtain a consistent shape and internal diameter. Additives such as colorant are difficult, because the PTFE doesn't readily want to mix with anything. Plain white PTFE is the cheapest and most common. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCapricorn tubing is manufactured using the most sophisticated equipment currently available. It always comes out perfectly round, and the diameter stays as consistent as possible. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eJust like filaments, Bowden tubes vary in their real-world diameters. Tubing is often labeled as having an inside diameter of 2.0mm. The measured diameter may vary, however, anywhere from 1.75 to 2.15. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCapricorn XS Bowden Tubing is made from the highest quality pure virgin Japanese PTFE, and formed using the paste extrusion process. However, we have added a \"Secret Sauce\" which lowers the coefficient of friction. This additive also makes the tubing opaque. \u003cbr\u003e\u003cbr\u003eXS tubing has a nominal internal diameter of 1.9mm, running from 1.85 to 1.95. This smaller diameter makes it ideal for printing flexible filaments, because there is no room for the filament to bind up inside the tube. The low friction coefficient allows any filament to glide through the tube with ease.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Note regarding interpretation of these specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGenerally it is not safe to bring any PTFE above 260.  The somewhat arbitrary melting temperature listed in this table is an indicator of stability of the material and is not indicative of a safe use temperature.  \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ccenter\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"tableheaders\"\u003e\u003cstrong\u003eOpaque White PTFE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"tableheaders\"\u003e\u003cstrong\u003eTranslucent White PTFE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"tableheaders\"\u003e\u003cstrong\u003eTL Series Light Blue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"tableheaders\"\u003e\u003cstrong\u003eXS Series Dark Blue\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eAdditives\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNone\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNone\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eBlue Color\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eBlue Color and Secret High Performance Additive Mixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eBest For Chunky Filaments\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eMaybe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eBest For Flexible Filaments\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eCan See Through\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003ePulling Friction\u003csup\u003e♠\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e1.0\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.9\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.8\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eColor\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eWhite\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eWhite, Translucent\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eBlue, Translucent\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eDark Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eDensity (kg\/m3)\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e2100-2200\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e2100-2200\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e2100 +\/-100\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e2300 +\/-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eHardness\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e58-62\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e58-62\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e55\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e60-65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eInner Diameter (mm)\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e\u0026gt; 2.0\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e\u0026gt; 2.0\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e2.0 +\/- 0.05\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e1.9 +\/- 0.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eLinear Thermal Expansion at 250 °C\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e3.4-3.6%\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e3.4-3.6%\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e3.4-3.6%\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e2.2-3.3%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eMaterial\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eCheapest PTFE\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eBetter PTFE\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eHighest Quality Pure Virgin PTFE\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eHighest Quality Pure Virgin PTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eMelting Point (°C)\u003csup\u003e♥\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eas low as 220\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003earound 260-327\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003earound 340\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003earound 340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eabout 4 mm\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eabout 4 mm\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e4.075 +\/- 0.025\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e3.995 +\/-0.025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eRoundness (ϵ)\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eVariable\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eVariable\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e\u0026lt; 0.1\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e\u0026lt; 0.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eStiffness\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eHigh\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eHigh\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eMedium\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eMedium High\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eThermal Conductivity (W\/m-k)\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.25\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.25\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.25\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eWear Rate (gm\/s)\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.01\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.01\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.01\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eYoung's Modulus (GPa)\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e\u0026lt;0.50\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e\u0026lt;0.50\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.50\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.532\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"tablecells\"\u003e\n\u003csup\u003e♠\u003c\/sup\u003ePulling Friction is calculated as the average force required to pull 1.2 meters of 1.75mm PLA filament through 1 meter of tubing at a constant speed, relative to 1 meter of cheap white reference tubing. Note that although we observed the friction of the TL series to be about the same or even slightly lower than our XS series, it also has a larger internal diameter.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"tablecells\"\u003e\n\u003csup\u003e♥\u003c\/sup\u003ePTFE does not transition quickly from a solid to liquid, but acts as a glass, slowly softening. Temperatures were approximated by heating samples of all tubing simultaneously, observing how quickly each one began to deform.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/center\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFull specsheet:  \u003ca href=\"https:\/\/www.captubes.com\/specs.html\"\u003eHere.\u003c\/a\u003e\u003c\/p\u003e","brand":"Capricorn","offers":[{"title":"1M Blue","offer_id":47610453772,"sku":"016627560063","price":11.99,"currency_code":"USD","in_stock":false},{"title":"1M Red","offer_id":40373311963221,"sku":"016627560070","price":11.99,"currency_code":"USD","in_stock":true},{"title":"1M Orange","offer_id":40373311995989,"sku":"016627560087","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/capricorn.jpg?v=1507754915"},{"product_id":"e3d-v6-gold-hot-end","title":"E3D V6 Gold Hot End 1.75mm (EOL)","description":"\u003cp\u003eIn celebration of their 3 year anniversary, E3D has launched a \"Gold\" hot end.   This hot end is hand selected by the E3D Team to use the best possible combination of components at a discount over buying them all individually as ad-ons.  \u003c\/p\u003e\n\u003cp\u003eCheck out what the E3D team has to say about it:\u003c\/p\u003e\n\u003cp class=\"product-tab-point-description\"\u003eTo celebrate the E3D V6’s third birthday we wanted to do something special to show off the HotEnd that spawned a whole ecosystem. More than just bling, the Gold edition V6 has been upgraded with some of the very best components available from E3D, at a lower price point than purchasing components individually. We upgraded the following stock components for the best we sell in order to create the bacon of HotEnds:\u003c\/p\u003e\n\u003cp class=\"product-tab-point-description\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/gold4_large.png?v=1507853957\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-tab-point\"\u003e\n\u003cdiv class=\"product-tab-point-title\"\u003e\n\u003cspan\u003e01.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eGolden Heat Sink\u003c\/div\u003e\n\u003cp\u003eWe’ve blinged up the heat sink with gold anodising, so that everyone can see from 10 yards away that you are a fancy individual who will only accept the best of the best in HotEnd technology..\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-tab-point\"\u003e\n\u003cdiv class=\"product-tab-point-title\"\u003e\n\u003cspan\u003e02.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eHeater Block\u003c\/div\u003e\n\u003cp\u003eWe’ve switched the aluminium heater block for a plated copper-alloy block, again increasing heat transfer to the filament and reducing the chance of filament goo sticking to it. This reduces the need for a sock, so that you can show off the shiny engraving.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-tab-point\"\u003e\n\u003cdiv class=\"product-tab-point-title\"\u003e\n\u003cspan\u003e03.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eNozzle\u003c\/div\u003e\n\u003cp\u003eThe standard brass nozzle has been swapped in favour of hardened steel. Whereas brass nozzles can be worn down and even ruined by abrasive materials, hardened steel will last a lifetime. If you print with carbon fibre, filled filaments, or even glow in the dark filament then these nozzles are a must.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-tab-point\"\u003e\n\u003cdiv class=\"product-tab-point-title\"\u003e\n\u003cspan\u003e04.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eHeater Cartridge\u003c\/div\u003e\n\u003cp\u003eWe’ve swapped standard heaters for our upcoming high precision, quick release heater cartridges. Spot-on physical dimensions and electrical specifications guarantee perfect performance. Quick release also makes tinkering with your HotEnd a doddle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-tab-point\"\u003e\n\u003cdiv class=\"product-tab-point-title\"\u003e\n\u003cspan\u003e05.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eFan Duct\u003c\/div\u003e\n\u003cp\u003eA clear, moulded plastic fan duct shows off the beautiful golden heatsink to its very best.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-tab-point\"\u003e\n\u003cdiv class=\"product-tab-point-title\"\u003e\n\u003cspan\u003e06.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ePTFE Guide\u003c\/div\u003e\n\u003cp\u003eWe’ve upgraded the standard PTFE guide to High Tolerance Capricorn XS PTFE Tubing. This new bowden tubing has a tight diameter and much-reduced friction, giving smoother, more accurate extrusion.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhat's in the box?  \u003c\/p\u003e\n\u003cp\u003eMetal Parts\u003cbr\u003e\u003cbr\u003e1 x Special Edition Gold Anodised Heatsink\u003cbr\u003e1 x 1.75mm Stainless Steel Heat Break\u003cbr\u003e1 x 1.75mm x 0.4mm Hardened Steel V6 Nozzle\u003cbr\u003e1 x Plated copper Heater Block\u003cbr\u003e1 x Thermistor Cartridge\u003cbr\u003e1 x 30x30x10mm fan (12V or 24V)\u003cbr\u003e2 x Connector Cable\u003cbr\u003e1 x 30W High Precision Heater Cartridge (12V or 24V)\u003cbr\u003e1 x Fibreglass Insulated Heater Connector Cable\u003cbr\u003e1 x Fan Duct\u003cbr\u003e1 x Silicone Sock\u003cbr\u003e1 x Thermal Compound Sachet\u003cbr\u003e1 x Fixings Kit\u003cbr\u003e800mm x High Tolerance Capricorn XS PTFE\u003cbr\u003e1X Collet Clip\u003c\/p\u003e\n\u003c\/div\u003e","brand":"E3D","offers":[{"title":"Kit 12V (unassembled) (EOL)","offer_id":588239732748,"sku":"7056861142","price":42.4,"currency_code":"USD","in_stock":true},{"title":"Kit 24V (unassembled) (EOL)","offer_id":21251576954965,"sku":"7056861143","price":42.4,"currency_code":"USD","in_stock":true},{"title":"Assembled Hot End 12V (standard) (EOL)","offer_id":47650551692,"sku":"B07FDCDTX4","price":54.9,"currency_code":"USD","in_stock":false},{"title":"Assembled Hot End 24V (less common) (EOL)","offer_id":21251575677013,"sku":"B07FDCMJ29","price":54.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/gold3_1.jpg?v=1507854336"},{"product_id":"e3d-v6-heatsink","title":"E3D V6 Heatsink - 1.75mm","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\nReplacement heatsink for authentic E3D V6 or compatible clones.  \n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":32848728064085,"sku":"4068635523","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/175hs_2048x2048_dcf5c9cf-1aa9-4fd9-a021-984b4d6a3731.jpg?v=1508102245"},{"product_id":"e3d-mk3-heatbreak","title":"Prusa MK3 Heatbreak by E3D- Single","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eE3D Heatbreak specifically for the Prusa MK3\u003c\/p\u003e\n\u003cp\u003ePrusa compatible heatbreak as manufactured by E3D using Stainless Steel over the stock Prusa which is titanium.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":12618467442773,"sku":"7093375029","price":14.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/Prusa-Break1.png?v=1538075699"},{"product_id":"e3d-replacement-heater-cartridge","title":"E3D Replacement Heater Cartridge","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eReplacement Heater Cartridge for E3D Hotend \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e 30W and 40W heater cartridges for E3D HotEnds. Double-check the power supply before choosing either 12V or 24V.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe also have the Prusa MK3 specific 40W\/24V heaters which are the same as the normal one, but specifically cut to length for MK3\u003c\/p\u003e\n\u003cp\u003eWe also stock the E3D High Precision Heater Cartridge\u003c\/p\u003e","brand":"E3D","offers":[{"title":"12v 30w heater cartridge","offer_id":47735544204,"sku":"4025828112","price":6.99,"currency_code":"USD","in_stock":true},{"title":"12v 40w heater cartridge","offer_id":47735544140,"sku":"E-HEATER-12V-40W","price":5.99,"currency_code":"USD","in_stock":true},{"title":"24v 40w heater cartridge","offer_id":47735544268,"sku":"E-HEATER-24V-40W","price":6.99,"currency_code":"USD","in_stock":false},{"title":"24v 30w heater cartridge","offer_id":47735544332,"sku":"4025828114","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/12v_25w_Heater-1000x1000_3f33cc18-376d-4baa-8dff-7382fa3827af.jpg?v=1508104373"},{"product_id":"e3d-30mm-fan-heatsink","title":"E3D 30mm Fan (heatsink fan)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\nReplacement fan for the heatsink mounted E3D shroud.","brand":"E3D","offers":[{"title":"12V","offer_id":47735726732,"sku":"4025828100","price":3.0,"currency_code":"USD","in_stock":true},{"title":"24V","offer_id":47735754636,"sku":"4025828101","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/f_2568933_18.jpg?v=1508105605"},{"product_id":"ptfe-tubing","title":"PTFE (Bowden) Tubing","description":"\u003cp\u003eAuthentic E3D High Quality PTFE Tubing for your Bowden feed printer or replacement for the short length in the hot end.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you order multiple quantities it will come as one continuous piece\u003c\/p\u003e","brand":"E3D","offers":[{"title":"1.75mm \/ 750mm","offer_id":47735876684,"sku":"4025828529","price":9.5,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 100mm","offer_id":47735877132,"sku":"016627557018","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/ptfetube_e78399c0-24b5-488b-a827-39697d6bfcd3.jpg?v=1508106330"},{"product_id":"e3d-threaded-bowden-coupling","title":"E3D Threaded Bowden Coupling - 1.75mm","description":"\u003cp\u003e\u003cstrong\u003eThreaded bowden coupling\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese high-quality pneumatic push-fit couplings have a 1\/8\" or 1\/4\" thread and screw directly to the bowden heat sink or any printed parts you may have that need to be converted to take PTFE tubing.\u003c\/p\u003e\n\u003cp\u003eThey are drilled out so that the PTFE tubing will run all the way through the fitting and into the part that you are screwing it into.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e- These are sold in single units.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.75mm filament:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor 4mm OD Tubing\u003c\/p\u003e\n\u003cp\u003eNominal Thread Size: 1\/8\" BSPP\u003c\/p\u003e\n\u003cp\u003eThread Length: 4mm\u003c\/p\u003e\n\u003cp\u003eOverall Height: 25.5mm\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":32848745267285,"sku":"4025828527","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/e3dthreadbowdencoupling.jpg?v=1742404900"},{"product_id":"e3d-groove-mount-bowden-coupling","title":"E3D Groove Mount Bowden Coupling - 1.75mm","description":"E3D Groove Mount Bowden Coupling\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":32848757555285,"sku":"7025854834","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/175groove_mount_199e00aa-95ca-42ce-9266-8f75111a9a40.jpg?v=1604073006"},{"product_id":"e3d-v6-fan-shroud-heatsink-mount","title":"E3D V6 Fan Duct (Heatsink Mount)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eE3D V6 Fan Shroud (Heatsink Mount)\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":47736153164,"sku":"4025828676","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/fanduct_91a39750-e0b8-4a4a-8888-db0beec314cf.jpg?v=1508107768"},{"product_id":"e3d-bowden-collet","title":"E3D Bowden Collet 1.75mm","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\nBowden Collet.  AKA that little black piece that clips into the top of your heatsink.","brand":"E3D","offers":[{"title":"Default Title","offer_id":47736197452,"sku":"4033685017","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/E3D_Kraken09thumb_30_2_3ea707ac-298c-47f2-bfdf-e5cc08e3d274.jpg?v=1508107916"},{"product_id":"e3d-thermistor-cartridge","title":"E3D Thermistor Cartridge","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eA custom made thermistor encapsulated into an easy to use cartridge package.\u003c\/p\u003e\n\u003cp\u003eUsing our proven Semitec 104GT thermistors, which are then potted into a cylindrical copper cartridge with a high conductivity ceramic based adhesive. The legs are insulated with fibreglass sleeving, and terminated with a Molex Microfit 3.0 connector.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eE3d will be Transitioning to 104NT thermistors. this has no impact on performance or capability it is a different model of thermistor that operates the same and encapsulated in the same manner . no additional changes is required when using a 104gt to a 104nt. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":47736245196,"sku":"7025854820","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/hero_1.jpg?v=1590178199"},{"product_id":"e3d-v6-nickel-plated-copper-heater-block","title":"E3D V6 Nickel Plated Copper Heater Block (Single)","description":"\u003ch2\u003ePlated Copper-Alloy Heater Block\u003c\/h2\u003e\n\u003cp\u003eThese blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond 350°C), and much-increased thermal conductivity these copper blocks are perfect for high temperature applications while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.\u003c\/p\u003e\n\u003cp\u003eIn addition to high temperature performance these blocks have an advanced nickel based plating, this plating considerably reduces the adhesion of plastic to the block. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300°C where a silicone sock can't be used.\u003c\/p\u003e\n\u003cp\u003eUse these blocks with our plated copper nozzles for the ultimate extrusion pairing!\u003c\/p\u003e\n\u003ch2\u003eWhy Copper?\u003c\/h2\u003e\n\u003cp\u003eCopper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. A small side effect is that the copper's higher thermal conductivity will also slightly increase your heat-up times, but it can provide tighter temperature control as well.\u003c\/p\u003e\n\u003cp\u003eThis copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C. It's perfect for the high-temperature printing that aluminium heater blocks can't handle.\u003c\/p\u003e\n\u003ch2 class=\"feature\"\u003eProduct Specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCopper-alloy heater block with nickel plating\u003c\/li\u003e\n\u003cli\u003eResistant to temperatures beyond 500°C\u003c\/li\u003e\n\u003cli\u003eLaser-engraved with E3D logo\u003c\/li\u003e\n\u003cli\u003eVery shiny\u003c\/li\u003e\n\u003cli\u003enon-stick surface, to repel filament without a silicone sock\u003c\/li\u003e\n\u003cli\u003eCompatible with sensor cartridges and silicone socks.\u003c\/li\u003e\n\u003cli\u003eNote: silicone socks are not intended for use at temperatures exceeding 300°C. Similarly, upgrade to a PT100 if you are printing at high temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":47736279884,"sku":"7030506824","price":24.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/copper-block-edit1-1000px-1000x1000_719083bf-5eef-497d-9b32-4cc5cbef83ac.jpg?v=1508108533"},{"product_id":"e3d-heater-block","title":"E3D Aluminum Heater Block","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eNeed to replace a part on your V6 hot end or want a quick upgrade to a knockoff?\u003c\/p\u003e\n\u003cp\u003eLook no further.  We maintain a supply of spares.  If you don’t see what you need, feel free to contact us to ask because we can special order it or we might just have one in the shop that didn't make it into the site inventory.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":31488502923349,"sku":"7025854885","price":15.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/E3D_Heater_Block.PNG?v=1508108774"},{"product_id":"40mm-fan","title":"40mm Fan","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eNeed to replace a part on your V6 hot end or want a quick upgrade to a knockoff?\u003c\/p\u003e\n\u003cp\u003eLook no further.  We maintain a supply of spares.  If you don’t see what you need, feel free to contact us to ask because we can special order it or we might just have one in the shop that didn't make it into the site inventory.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"12v \/ Clear","offer_id":39343317680213,"sku":"4036484595","price":7.99,"currency_code":"USD","in_stock":true},{"title":"24v \/ Clear","offer_id":39343317745749,"sku":"4036484598","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/fan-dc_1.png?v=1508109067"},{"product_id":"e3d-high-precision-heater-cartridge","title":"E3D High Precision Heater Cartridge (EOL)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv\u003e\n\u003cp\u003ePlease note that if you are planning to use this on a printer to verify that you want 12v or 24v versions. For example the Prusa MK3 printer uses a 24v power supply and the MK2 uses a 12v power supply.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWith these new heater cartridges, E3D has managed to improve on their already first-class 30-watt heaters and now including their 40-watt heaters as well. They have also added a connector, so that combined with their cartridge thermistor you can now change Hot Ends without having to modify all your cable routing. The cable included is also crimped with ferrules at the other end to make plugging in your new cartridge much easier and neater (see images). Get your HotEnd hot quickly and reliably hit the highest of temperatures with these high shiny new cartridges.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eEvery heater comes with one meter of silicone-insulated high-temperature cabling, and is available in 12V or 24V.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003eAdditional Data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 30W\/40W\u003c\/li\u003e\n\u003cli\u003eLength: 21mm\u003c\/li\u003e\n\u003cli\u003eDiameter: 6mm\u003c\/li\u003e\n\u003cli\u003eLead length: 1000mm\u003c\/li\u003e\n\u003cli\u003eConnector: Molex Microfit 3.0\u003c\/li\u003e\n\u003cli\u003eFerrule: E7608\u003c\/li\u003e\n\u003cli\u003eLength from cartridge to connector: 143mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"E3D","offers":[{"title":"12V \/ 40w","offer_id":531425886220,"sku":"8000021778","price":11.99,"currency_code":"USD","in_stock":true},{"title":"24V \/ 40w","offer_id":531425918988,"sku":"8000021792","price":11.99,"currency_code":"USD","in_stock":false},{"title":"12V \/ 30w","offer_id":22771275300949,"sku":"8000021761","price":11.99,"currency_code":"USD","in_stock":true},{"title":"24V \/ 30w","offer_id":22771278708821,"sku":"8000021785","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/ends.jpg?v=1511746808"},{"product_id":"2m-long-12v-30w-heater-cartridge","title":"2M long 12v 30W Heater Cartridge (EOL)","description":"\u003ch2\u003e\u003cstrong\u003eBuilding your own large format printer?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch2\u003eAdding a \u003ca href=\"https:\/\/printedsolid.com\/products\/e3d-hot-end-kit-v6\" target=\"_blank\" title=\"E3Dv6 Hoend\" rel=\"noopener noreferrer\"\u003eE3Dv6 Hotend \u003c\/a\u003eto your \u003ca href=\"https:\/\/printedsolid.com\/products\/cr10s\" target=\"_blank\" title=\"CR-10S\" rel=\"noopener noreferrer\"\u003eCR-10S\u003c\/a\u003e?\u003c\/h2\u003e\n\u003ch2\u003eJust need more length out of your heater wires?\u003c\/h2\u003e\n\u003cp\u003eAll authentic E3D heater cartridges are provided as a standard 1m length.  This is the best choice for most printers, but if you have a giant beast of a machine, you need long wires.  So, Printed Solid has sourced these 2m long heaters for you.  \u003c\/p\u003e\n\u003cp\u003eThis heater cartridge has a full 2 meter wire lead without any splices and no extra connectors in the way. Avoid splicing the wires and eliminate the potential problems with heat, movement, fraying, disconnections along  the wire.\u003c\/p\u003e","brand":"Printed Solid","offers":[{"title":"Single (EOL)","offer_id":690992578572,"sku":"016627555328","price":3.5,"currency_code":"USD","in_stock":true},{"title":"Three Pack (EOL)","offer_id":12232921776213,"sku":"016627555335","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/Heater_b3947a5d-66d4-4ab4-92c9-a6b4b70dd41b.png?v=1512159762"},{"product_id":"e3d-collet-clip-1-75mm","title":"2 pack E3D Collet Clip 1.75mm","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":1576896331788,"sku":"4033685017","price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/175mm-clip_2__1.jpg?v=1516301466"},{"product_id":"capricorn-tl-bowden-tubing-1-75mm","title":"Capricorn TL Bowden Tubing 1.75mm","description":"\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003ePTFE, or Polytetrafluoroethylene, is a synthetic polymer commonly used as a coating for non-stick pots and pans. It is the slipperiest substance known to man, and is said to be the only surface to which a gecko cannot stick. Although Bowden tubes can be made from several different polymers, PTFE is generally considered the best because of its high melting point and low coefficient of friction. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1.75mm Bowden tubing, because of its small diameter, is made with an expensive paste extrusion process. Very precise equipment is needed to obtain a consistent shape and internal diameter. Additives such as colorant are difficult, because the PTFE doesn't readily want to mix with anything. Plain white PTFE is the cheapest and most common. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCapricorn tubing is manufactured using the most sophisticated equipment currently available. It always comes out perfectly round, and the diameter stays as consistent as possible. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eJust like filaments, Bowden tubes vary in their real-world diameters. Tubing is often labeled as having an inside diameter of 2.0mm. The measured diameter may vary, however, anywhere from 1.75 to 2.15. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe TL Series High Performance Bowden Tubing is made from the highest quality PTFE, it has a light blue color, and its translucent. It has a good temperature resistance, but not quite as high as XS. \u003cbr\u003e\u003cbr\u003eYour printer will look as good as it performs. You are going to love the way your printer looks. Throw that plain white tube in the trash. With a traditional 2.0mm inner diameter, you can print chunky or out of spec filaments with ease. \u003cbr\u003e\u003cbr\u003eBecause of its translucence, you can see the filament inside, and diagnose any issues that way. If you don't plan to print many flexible or high temperature materials, this is the Bowden Tube for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Note regarding interpretation of these specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGenerally it is not safe to bring any PTFE above 260.  The somewhat arbitrary melting temperature listed in this table is an indicator of stability of the material and is not indicative of a safe use temperature.  \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ccenter\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"tableheaders\"\u003e\u003cstrong\u003eOpaque White PTFE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"tableheaders\"\u003e\u003cstrong\u003eTranslucent White PTFE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"tableheaders\"\u003e\u003cstrong\u003eTL Series Light Blue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"tableheaders\"\u003e\u003ca href=\"https:\/\/printedsolid.com\/products\/capricorn-xs-reduced-friction-bowden-tubing\"\u003e\u003cstrong\u003eXS Series Dark Blue\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eAdditives\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNone\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNone\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eBlue Color\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eBlue Color and Secret High Performance Additive Mixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eBest For Chunky Filaments\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eMaybe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eBest For Flexible Filaments\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eCan See Through\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003ePulling Friction\u003csup\u003e♠\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e1.0\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.9\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.8\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eColor\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eWhite\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eWhite, Translucent\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eBlue, Translucent\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eDark Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eDensity (kg\/m3)\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e2100-2200\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e2100-2200\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e2100 +\/-100\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e2300 +\/-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eHardness\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e58-62\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e58-62\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e55\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e60-65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eInner Diameter (mm)\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e\u0026gt; 2.0\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e\u0026gt; 2.0\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e2.0 +\/- 0.05\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e1.9 +\/- 0.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eLinear Thermal Expansion at 250 °C\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e3.4-3.6%\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e3.4-3.6%\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e3.4-3.6%\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e2.2-3.3%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eMaterial\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eCheapest PTFE\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eBetter PTFE\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eHighest Quality Pure Virgin PTFE\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eHighest Quality Pure Virgin PTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eMelting Point (°C)\u003csup\u003e♥\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eas low as 220\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003earound 260-327\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003earound 340\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003earound 340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eabout 4 mm\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eabout 4 mm\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e4.075 +\/- 0.025\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e3.995 +\/-0.025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eRoundness (ϵ)\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eVariable\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eVariable\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e\u0026lt; 0.1\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e\u0026lt; 0.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eStiffness\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eHigh\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eHigh\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eMedium\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003eMedium High\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eThermal Conductivity (W\/m-k)\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.25\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.25\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.25\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eWear Rate (gm\/s)\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.01\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.01\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.01\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd class=\"columnheaders\"\u003eYoung's Modulus (GPa)\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e\u0026lt;0.50\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e\u0026lt;0.50\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.50\u003c\/td\u003e\n\u003ctd class=\"tablecells\"\u003e0.532\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"tablecells\"\u003e\n\u003csup\u003e♠\u003c\/sup\u003ePulling Friction is calculated as the average force required to pull 1.2 meters of 1.75mm PLA filament through 1 meter of tubing at a constant speed, relative to 1 meter of cheap white reference tubing. Note that although we observed the friction of the TL series to be about the same or even slightly lower than our XS series, it also has a larger internal diameter.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"tablecells\"\u003e\n\u003csup\u003e♥\u003c\/sup\u003ePTFE does not transition quickly from a solid to liquid, but acts as a glass, slowly softening. Temperatures were approximated by heating samples of all tubing simultaneously, observing how quickly each one began to deform.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/center\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFull specsheet:  \u003ca href=\"https:\/\/www.captubes.com\/specs.html\"\u003eHere.\u003c\/a\u003e\u003c\/p\u003e","brand":"Capricorn","offers":[{"title":"1m \/ Pink","offer_id":39434633609301,"sku":"016627560025","price":10.99,"currency_code":"USD","in_stock":true},{"title":"1m \/ Yellow","offer_id":39434633642069,"sku":"016627560032","price":10.99,"currency_code":"USD","in_stock":true},{"title":"1m \/ Orange","offer_id":39434633707605,"sku":"016627560049","price":10.99,"currency_code":"USD","in_stock":true},{"title":"1m \/ Green","offer_id":39434633773141,"sku":"016627560056","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/1002-2stick.jpg?v=1624850676"},{"product_id":"e3d-pt-100-temperature-sensor","title":"E3D PT100 Temperature Sensor","description":"\u003cp\u003eFor advanced Users Only.\u003c\/p\u003e\n\u003cp\u003eThis sensor requires installation of a separate amplifier board and heater block for cartridges.  If you are looking for the package with the amplifier, it is available \u003ca href=\"https:\/\/printedsolid.com\/products\/pt100-total-upgrade-kit\"\u003ehere\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003ePT100's are  high temperature, high accuracy temperature sensors that you can now use on your E3D V6 HotEnd instead of a thermistor or thermocouple. PT100's are able to measure higher temperatures than thermistors - upto 400°C, and are more accurate then both thermistors and thermocouples in general. Our PT100 sensors are also very easy to handle, being of a metal cartridge type construction that is secured with a set screw, no more fiberglass sleeving or clamping washer.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe PT100 sensor will not fit in the standard E3D Hotends, but can be used with E3D V6, Chimera, Lite6, and Kraken by using the PT100 Heater Block available in the spares and extras section.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease be aware that a PT100 is not the same as a thermistor and unless your electronics explicitly supports RTD Sensing devices you will need an amplifier board. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ultimaker 2 uses PT100 sensors by default, and this sensor allows you to connect your E3D Hotend and Ultimaker electronics with no alteration to the electronics or firmware of the Ultimaker 2. \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":1980722085900,"sku":"8000025363","price":17.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/pt100_light.jpg?v=1519125940"},{"product_id":"e3d-beta-threaded-heatsink-1-75mm","title":"E3D Beta Threaded Heatsink 1.75mm (EOL)","description":"\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAn alternative to Groovemount\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThere are a couple of major flaws with groovemounting (or previous standard HotEnd mounting style):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFit is highly dependent on quality of part machining\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFit can become loose from repeated removal and refitting\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo fight these problems, we're beta-releasing a new, blue, screw-threaded heat sink. Threading also brings some benefits of its own:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt's reliable and repeatable to machine\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWear due to repeated removal and refitting is not an issue\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt offers more versatile mounting options, e.g. through a threaded plate\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt offers the exact same thermal performance as a standard V6 heatsink and is already in use by companies like Duet3D. We'd like you to try it next, and if you have any feedback then get in contact!\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShips with M12 nut, thermal paste and collet with clip.\u003c\/em\u003e\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":2059943280652,"sku":"7073756254","price":9.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/E3D_Beta_Threaded_heatsink.jpg?v=1519574716"},{"product_id":"e3d-v6-nozzle-nickel-plated-copper-1-75mm","title":"E3D V6 Nozzle - Nickel Plated Copper - 1.75mm","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"ves-container\"\u003e\n\u003cdiv class=\"ves-inner\"\u003e\n\u003cdiv class=\"row row-level-1\"\u003e\n\u003cdiv class=\"row-inner clearfix\"\u003e\n\u003cdiv class=\"col-lg-8 col-md-4 col-sm-6 col-xs-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv class=\"ves-widget widget-html block\"\u003e\n\u003cdiv class=\"widget-inner block-content\" id=\"widget-html16927065441520446459\"\u003e\n\u003ch1\u003eV6 Plated Copper Nozzles\u003c\/h1\u003e\n\u003chr\u003e\n\u003cp\u003eThese nozzles are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500°C, and with much-increased thermal conductivity these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.\u003c\/p\u003e\n\u003cp\u003eIn addition to high temperature performance these nozzles have an advanced nickel based plating, considerably reducing the adhesion of plastic to the nozzle. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300°C where a silicone sock can't be used.\u003c\/p\u003e\n\u003cp\u003eCopper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control.\u003c\/p\u003e\n\u003cp\u003eThis copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing that other nozzles can't handle.\u003c\/p\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ves-container\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"ves-inner\"\u003e\n\u003cdiv class=\"row row-level-1\"\u003e\n\u003cdiv class=\"row-inner clearfix\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-4 col-sm-6 col-xs-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"ves-widget widget-html block\"\u003e\n\u003cdiv class=\"widget-inner block-content\" id=\"widget-html15174847731520446459\"\u003e\n\u003ch4\u003eCombine with our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/printedsolid.com\/collections\/e3d\/products\/e3d-v6-nickel-plated-copper-heater-block\"\u003eplated copper blocks\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor the ultimate extrusion pairing. No need for hot tightening, this pairing\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ejust works\u003c\/b\u003e.\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eM6 thread, suitable for use with the Prusa i3 and i3 MK2, and the Olssen block for Ultimaker.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable class=\"nozzle_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: center;\" colspan=\"1\"\u003eNozzle Size\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eID Dots\u003csup\u003e*\u003c\/sup\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.25mm\u003c\/td\u003e\n\u003ctd\u003eHighest Precision - Slower Prints\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.30mm\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.35mm\u003c\/td\u003e\n\u003ctd\u003eSlight Increase in Precision\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.40mm\u003c\/td\u003e\n\u003ctd\u003eBalanced Nozzle - Supplied by Default\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.60mm\u003c\/td\u003e\n\u003ctd\u003eOur Preferred Minimum for Wood Filled Filament\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.80mm\u003c\/td\u003e\n\u003ctd\u003eLower Precision - High Speed, Higher Strength\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003csup\u003e*\u003c\/sup\u003e Dots are machined onto the hex-flats of the nozzles for easy identification.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6 style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/h6\u003e\n\u003cp\u003eNote: V6 style nozzles can be installed on the Original Prusa MK4\/S, CORE and XL 3D printers with the \u003ca rel=\"noopener\" href=\"https:\/\/www.printedsolid.com\/products\/genuine-e3d-v6-adaptor-for-prusa-mk4-xl\" target=\"_blank\"\u003eNextruder V6 Nozzle Adapter\u003c\/a\u003e (sold separately).\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.25mm","offer_id":2184457519116,"sku":"4025828638","price":12.8,"currency_code":"USD","in_stock":true},{"title":"0.3mm","offer_id":2184457682956,"sku":"4025828639","price":12.8,"currency_code":"USD","in_stock":true},{"title":"0.35mm","offer_id":2184457781260,"sku":"4025828640","price":12.8,"currency_code":"USD","in_stock":true},{"title":"0.4mm","offer_id":2184457551884,"sku":"4025828641","price":12.8,"currency_code":"USD","in_stock":true},{"title":"0.5mm","offer_id":22917276958805,"sku":"4025828642","price":12.8,"currency_code":"USD","in_stock":true},{"title":"0.6mm","offer_id":2184457584652,"sku":"4025828643","price":12.8,"currency_code":"USD","in_stock":true},{"title":"0.8mm","offer_id":2184457617420,"sku":"4025828644","price":12.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/v6_copper_nozzle_2.png?v=1520523698"},{"product_id":"acrylic-sheets-for-prusa-lack-enclosure","title":"V1 Acrylic Sheets for Prusa Lack Enclosure","description":"\u003cp\u003e\u003cstrong\u003eThis kit includes 3 sheets cut to 440mm x 440mm and 2 sheets cut to 220mm x 440mm; 0.125\" thickness.\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eYou will need to purchase the rest of the hardware separately.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eIf you want to build the Prusa Lack enclosure from their article and need the acrylic pieces then we have you covered. \u003ca href=\"https:\/\/www.prusaprinters.org\/cheap-simple-3d-printer-enclosure\/\"\u003ehttps:\/\/www.prusaprinters.org\/cheap-simple-3d-printer-enclosure\/\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eAt Printed Solid we make a \u003ca href=\"https:\/\/printedsolid.com\/collections\/enclosures\"\u003eline of enclosures\u003c\/a\u003e for various printers including our own design for the \u003ca href=\"https:\/\/printedsolid.com\/products\/safety-enclosure-for-prusa-printers\"\u003ePrusa Printers\u003c\/a\u003e but we know that sometimes you want a DIY solution.\u003c\/p\u003e\n\u003cp\u003eAcrylic can be very expensive at your local box store and the quality can vary greatly. So we have used our buying power to get you all of the acrylic pieces needed to make your own IKEA Lack enclosure. Our acrylic is manufactured to very high tolerances and is made from cast instead of extruded acrylic. Cast acrylic is stronger than extruded and has better optical clarity so you would get a wavy appearance looking at your printer go. \u003c\/p\u003e\n\u003cp\u003eWe have priced this lower than most box stores would charge and that includes free shipping in the United States.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eUPDATE! We are now stocking the new version 2 of the acrylic pieces. \u003ca href=\"https:\/\/www.printedsolid.com\/products\/v2-acrylic-sheets-for-prusa-lack-enclosure\"\u003ehttps:\/\/www.printedsolid.com\/products\/v2-acrylic-sheets-for-prusa-lack-enclosure\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h2\u003e","brand":"Printed Solid","offers":[{"title":"Default Title","offer_id":12334547828821,"sku":"PSPL01","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/prusaSheets.png?v=1525718052"},{"product_id":"bondtech-bmg-extruder","title":"Bondtech BMG Extruder (EOL)","description":"\u003cp\u003eBondtech now brings you the best and lightest performing extruder on the market that combines low weight with high feeding capacity together with our proven and highly celebrated Dual-Drive technology for maximum performance without grinding and slipping. \u003cbr\u003e For 1.75 mm size filament only.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"articleText\"\u003eThe Bondtech BMG utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears to give you a compact powerhouse for all your applications. Whether you require high resolution prints with small nozzles or high-flow prints with big nozzles the optimized gearing ratio combined with our industry leading drive gears provides unparalleled pushing power and lightning fast retractions in a lightweight and compact package.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eBondtech Dual-Drive\u003c\/b\u003e\u003cbr\u003e Our unique Dual-Drive technology delivers uninterrupted material flow without fear of grinding or slipping in even the most demanding conditions. Bondtech users the world over will attest that even in prints with thousands of retracts our extruders perform flawless, with unmatched precision, and zero damage or degradation to the filament.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eMulti-material capability\u003c\/b\u003e\u003cbr\u003e Our new BMG extruder feeds all material with high reliability, from slippery nylons and soft TPU\/TPE filaments to highly rigid and sometimes brittle carbon-filled high-strength materials. The extruder is designed for 1.75 mm filaments, but has been tested to ensure performance of filament from 1.5mm up to 2.0mm allowing for high reliability regardless of the tolerance of the filament used. The filament path is fully guided throughout the extruder body and the housing maintains tight tolerances to the drive gears mitigating the chances of Filament Misfeed when the hotend experiences increased backpressure or highly flexible filaments are used.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eAdjustable tension\u003c\/b\u003e\u003cbr\u003e The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament. This gives you the power to adjust according to your preferences and to optimize for the type of material you are using.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eQuick-Release\u003c\/b\u003e\u003cbr\u003e To be able to do material changes in a snap, simply activate the Quick-Release lever to release the tension and pull the material to be changed out of the extruder, keep it activated and insert the new material.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eMulti-application design\u003c\/b\u003e\u003cbr\u003e This new extruder can be used in a Bowden or direct setups and gives you the flexibility to choose what works best for your application. In addition it features an integrated hotend retention method compatible with the E3D-V6 hotends or others using the GrooveMount standard. Mounting your hotend is simple, secure, and wobble free by means of just two bolts.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eFlexible mounting options\u003c\/b\u003e\u003cbr\u003e We have designed a standard mounting bracket, both in CNC and as a 3D printable part that you can download from our stl-archive for free. Our standard mount is CNC-machined in 3 mm aluminum for maximum stability. Please see below for available mounts.\u003cbr\u003e \u003cbr\u003e The extruder can use any Nema17 motor with a standard 5 mm shaft. For suitable motors please select one of the below or use your own motor.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eThis extruder is sold without motor!\u003c\/b\u003e\u003cbr\u003e Weight without motor: 75g\u003cbr\u003e E-step value: 415\u003cbr\u003e \u003cbr\u003e Please not the orientation of the motorgear on the photo!\u003c\/div\u003e\n\u003cdiv class=\"articleAttachmentsSurrounder\"\u003e\n\u003cdiv class=\"articleAttachmentLinkContainer articleAttachmentLinkContainerArticle\"\u003e\u003ca href=\"http:\/\/www.bondtech.se\/en\/products\/extruders\/bmg-extruder\" class=\"articleAttachmentLink\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRead more\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"articleAttachmentLinkContainer articleAttachmentLinkContainerArticle\"\u003e\u003ca href=\"http:\/\/www.bondtech.se\/en\/products\/freebies-stl-files\/\" class=\"articleAttachmentLink\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSTL-file for standard mount\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"articleAttachmentLinkContainer articleAttachmentLinkContainerArticle\"\u003e\u003ca href=\"http:\/\/shop.bondtech.se\/shop\/ws71\/47371\/art86\/115327186-6b1b12-BMG_Extruder.STEP\" class=\"articleAttachmentLink\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCadmodel (Step-file)\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"articleAttachmentLinkContainer articleAttachmentLinkContainerArticle\"\u003e\u003ca href=\"https:\/\/youtu.be\/dTUppEUFXVE\" class=\"articleAttachmentLink\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eE3D-V6 installation video\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bondtech","offers":[{"title":"Right Handed (regular)","offer_id":12384740573269,"sku":"016627559395","price":39.93,"currency_code":"USD","in_stock":true},{"title":"Left Handed (mirrored)","offer_id":12384740606037,"sku":"016627559401","price":39.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/1.jpg?v=1527119304"},{"product_id":"e3d-nozzle-pro-pack","title":"E3D Nozzle Pro Pack - 1.75mm","description":"\u003cdiv class=\"ves-container\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"ves-inner\"\u003e\n\u003cdiv class=\"row row-level-1\"\u003e\n\u003cdiv class=\"row-inner clearfix\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-4 col-sm-6 col-xs-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"ves-widget widget-html block\"\u003e\n\u003cdiv id=\"widget-html1893903501532138231\" class=\"widget-inner block-content\"\u003e\n\u003cp\u003eThis pack is the pinnacle of nozzle prowess, featuring six of E3D's most exciting, useful and experimental nozzles. Brass, Copper Alloy, and Hardened Steel all feature in this kit, matched with the sizes we recommend for the most interesting use cases.\u003c\/p\u003e\n\u003cp\u003eNot to mention, this pack means you get more than 10% off compared to buying separately, and includes a handy organisation and storage tin.\u003c\/p\u003e\n\u003cp\u003eThese E3D V6 nozzles have an M6 thread and are compatible with the full V6 ecosystem and many other 3D printers, including the Prusa i3 Mk2.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ves-container\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"ves-inner\"\u003e\n\u003cdiv class=\"row row-level-1\"\u003e\n\u003cdiv class=\"row-inner clearfix\"\u003e\n\u003cdiv class=\"col-lg-6 col-md-4 col-sm-6 col-xs-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"ves-widget widget-images block\"\u003e\n\u003cdiv class=\"widget-inner block-content clearfix\"\u003e\n\u003cdiv class=\"image-item\"\u003e\u003cspan class=\"img-animation\"\u003e\u003cimg src=\"https:\/\/static.e3d-online.com\/media\/wysiwyg\/nozzle-buckle.jpg\" class=\"img-responsive  left-block\" alt=\"Image\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-6 col-md-4 col-sm-6 col-xs-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"ves-widget widget-html block\"\u003e\n\u003cdiv id=\"widget-html4600345771532138231\" class=\"widget-inner block-content\"\u003e\n\u003ch3\u003eThe 3mm \u0026amp; 1.75mm Nozzle Pro Packs contain:\u003c\/h3\u003e\n\u003ch4\u003eBrass Nozzles:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.15mm (experimental)\u003c\/li\u003e\n\u003cli\u003e0.8mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNickel-Plated Copper Alloy\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.25mm\u003c\/li\u003e\n\u003cli\u003e0.4mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHardened Steel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.4mm\u003c\/li\u003e\n\u003cli\u003e0.6mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ves-container\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"ves-inner\"\u003e\n\u003cdiv class=\"row row-level-1\"\u003e\n\u003cdiv class=\"row-inner clearfix\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-4 col-sm-6 col-xs-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"ves-widget widget-html block\"\u003e\n\u003cdiv id=\"widget-html11901384321532138231\" class=\"widget-inner block-content\"\u003e\n\u003ch3\u003e\u003cspan\u003eBRASS\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch4\u003e0.15mm\u003c\/h4\u003e\n\u003cp\u003eThe ultimate nozzle for ‘wow-factor’ tiny printing - recommended for use with high flow materials like MG94 and MatX. We’ve printed intricate castles only 2 cm high with every tiny detail still visible, right down to the steps of the spiral staircase. Requires care and attention to use well, keeping contamination out of the nozzle and careful cooling but the results are worth the effort.\u003c\/p\u003e\n\u003ch4\u003e0.8mm\u003c\/h4\u003e\n\u003cp\u003eFor BIG layers, aesthetically stunning, stronger parts, \u0026amp; faster printing. The 0.8mm volcano nozzle was so popular we introduced this 0.8mm to \u003cspan\u003eE3D's\u003c\/span\u003e standard V6 range. It's not quite as fast as a volcano, but still lets you try this style of printing without changing your HotEnd.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eCopper\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch4\u003e0.25mm\u003c\/h4\u003e\n\u003cp\u003eAllows you to resolve fine details in small parts, but is easier to use than a 0.15mm nozzle. Made in high-conductivity copper with a non-stick nickel coating this will result in clean, detailed prints.\u003c\/p\u003e\n\u003ch4\u003e0.4mm\u003c\/h4\u003e\n\u003cp\u003eOur ‘standard’ nozzle size of choice. The nickel coating has low surface energy which reduces plastic adhesion, and has potential to increase flow rate. Copper alloy also performs better at higher temperatures than other nozzles. Great for sticky materials like TPUs and PET-Gs as well as extreme temperature polymers like Ultem.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eHardened Steel\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch4\u003e0.4mm\u003c\/h4\u003e\n\u003cp\u003eHarder, and more resistant to exotic abrasive filaments like carbon fibre, metal-filled PLA and glow in the dark PLA . It affords a near-infinite lifespan compared to brass when printing abrasives.\u003c\/p\u003e\n\u003ch4\u003e0.6mm\u003c\/h4\u003e\n\u003cp\u003eAchieve a fine combination of precision and speed. The benefits of hardened steel’s incredible wear resistance and strong interlayer adhesion. Recommended with carbon fibre composites for ultimate strength parts.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eE3D Nozzle Spanner\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eJust a handy spanner for swapping out your nozzles. It works with all E3D nozzles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote: V6 style nozzles can be installed on the Original Prusa MK4\/S, CORE and XL 3D printers with the \u003ca rel=\"noopener\" href=\"https:\/\/www.printedsolid.com\/products\/genuine-e3d-v6-adaptor-for-prusa-mk4-xl\" target=\"_blank\"\u003eNextruder V6 Nozzle Adapter\u003c\/a\u003e (sold separately).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":32848761815125,"sku":"B077G6VSS7","price":64.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/npp1_3.jpg?v=1532254901"},{"product_id":"slice-engineering-50w-heater","title":"Slice Engineering 50w heater (EOL)","description":"\u003cdiv data-content-field=\"excerpt\" class=\"ProductItem-details-excerpt\"\u003e\n\u003cp style=\"white-space: pre-wrap;\"\u003eHigh performance, high temperature, 50 watt cartridge heaters made to Slice Engineering’s specifications. Overall length: 22 mm. Diameter sized fit into a 6 mm H7 toleranced hole. Leads are 1 m in length. Available in 12V or 24V variations.\u003c\/p\u003e\n\u003cdiv data-content-field=\"excerpt\" class=\"ProductItem-details-excerpt\"\u003e\n\u003cp\u003eWe inspect the outer diameter of our cartridge heaters with a full-length “go” ring gage to ensure the outer diameter does not exceed the maximum material condition envelope.  Beware loosely toleranced cartridge heaters that will not provide a close fit in a heater block.\u003c\/p\u003e\n\u003cp\u003eDesigned in Gainesville, Florida; engineered, manufactured and assembled in China.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for alternative heaters that will work with the Mosquito Hotend check out the \u003ca href=\"https:\/\/www.printedsolid.com\/products\/e3d-high-precision-heater-cartridge\"\u003eE3D High Precision Heater Cartridge \u003c\/a\u003eOr the new \u003ca href=\"https:\/\/www.printedsolid.com\/products\/e3d-high-temperature-65w-heater-cartridge\"\u003eE3D High Temp 65W heater\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Slice Engineering","offers":[{"title":"12v","offer_id":12533493989461,"sku":"P-5HC-AC-0001-12V","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/50WHeaterCartridge-24VJPEG_540x_bddf0b4a-7658-48ea-ad92-d97bf0f370f2.jpg?v=1611597383"},{"product_id":"slice-engineering-harden-nozzles","title":"Slice Engineering Vanadium Nozzle (EOL)","description":"\u003cdiv class=\"ProductItem-details-excerpt\" data-content-field=\"excerpt\"\u003e\n\u003ch1 style=\"white-space: pre-wrap;\"\u003e\u003c\/h1\u003e\n\u003cp style=\"white-space: pre-wrap;\"\u003eWould you like an indestructible nozzle? Try Slice out. With a 64 Rockwell C hardness (Vickers HV 910) minimum rating, it’s virtually unscratchable. It’s actually hard to differentiate between the brand new and the used nozzles (minus the filament residue).\u003c\/p\u003e\n\u003cp style=\"white-space: pre-wrap;\"\u003eThis Slice nozzle also use a repellent coating to reduce plastic build-up on the nozzle, so you are less likely to experience misprints from plastic being scraped across your masterpiece.\u003c\/p\u003e\n\u003cp style=\"white-space: pre-wrap;\"\u003ePeople who truly value their prints and put deep care into their finished product — they want the most durable, reliable, premier nozzle to carry out the job.\u003c\/p\u003e\n\u003cp style=\"white-space: pre-wrap;\"\u003eOr you could buy a couple A2 nozzles and take your chances on them wearing out. But just remember: they’re likely being machined with the metal we use in our nozzles.\u003c\/p\u003e\n\u003cp style=\"white-space: pre-wrap;\"\u003eThat’s embarrassing for you, isn’t it?\u003c\/p\u003e\n\u003cp style=\"white-space: pre-wrap;\"\u003eOh, and did we mention that Slice Engineering offers a lifetime warranty against abrasion?\u003c\/p\u003e\n\u003cbr\u003e\n\u003cdiv class=\"ProductItem-details-excerpt\" data-content-field=\"excerpt\"\u003e\n\u003cdiv class=\"ProductItem-details-excerpt\" data-content-field=\"excerpt\"\u003e\n\u003cp style=\"white-space: pre-wrap;\"\u003e \u003c\/p\u003e\n\u003cp style=\"white-space: pre-wrap;\"\u003eDesigned and engineered in Gainesville, FL; Manufactured in Indiana.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Slice Engineering","offers":[{"title":"1.75MM Filament 0.3 size","offer_id":22691867099221,"sku":"P-VN-NO-0027-0.3","price":16.5,"currency_code":"USD","in_stock":false},{"title":"1.75MM Filament 0.8 size","offer_id":22691870834773,"sku":"P-VN-NO-0031-0.8","price":16.5,"currency_code":"USD","in_stock":false},{"title":"1.75MM Filament 0.2 size","offer_id":32496112894037,"sku":"P-VN-NO-0026-0.2","price":16.5,"currency_code":"USD","in_stock":false},{"title":"1.75MM Filament 1.0 size","offer_id":32906243571797,"sku":"P-VN-NO-0080-1.0","price":16.5,"currency_code":"USD","in_stock":true},{"title":"1.75MM Filament 1.2 size","offer_id":32906243670101,"sku":"P-VN-NO-0081-1.2","price":16.5,"currency_code":"USD","in_stock":true},{"title":"1.75MM Filament 1.4 size","offer_id":32906244554837,"sku":"P-VN-NO-0080-1.4","price":16.5,"currency_code":"USD","in_stock":true},{"title":"1.75MM Filament 1.8 size","offer_id":32906245668949,"sku":"P-VN-NO-0083-1.8","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/Nozzlegroup.jpg?v=1593008912"},{"product_id":"e3d-v6-hotend-nozzle-fun-pack","title":"E3D V6 Hotend Nozzle Fun Pack - 1.75mm","description":"\u003cdiv class=\"data item content\" id=\"product.info.description\" data-role=\"content\" aria-labelledby=\"tab-label-product.info.description\" role=\"tabpanel\" aria-hidden=\"false\"\u003e\n\u003cdiv class=\"product attribute description\"\u003e\n\u003cdiv class=\"value\"\u003e\n\u003cp\u003eA full collection of E3D-V6 Ecosystem Brass nozzles, set in a soft foam cushion for protection. Print all the things in all the resolutions!\u003c\/p\u003e\n\u003cp\u003eSuitable for all E3D Hotends except for Cyclops and Volcano. We've included the full range of nozzles for those who want to explore the limits of high resolution printing with small nozzles, as well high speed high layer height printing with large nozzles. We've even included our purpose-made E3D Nozzle spanner to make changing out the nozzles a breeze!\u003c\/p\u003e\n\u003cp\u003eThis pack contains the following size nozzles in all brass. If you want a pack with harden steel nozzles and nickle plated copper check out our\u003ca href=\"https:\/\/www.printedsolid.com\/products\/e3d-nozzle-pro-pack\"\u003e Pro Pack. \u003c\/a\u003e\u003c\/p\u003e\n\u003cul style=\"padding-left: 40px;\"\u003e\n\u003cli\u003e0.25mm\u003c\/li\u003e\n\u003cli\u003e0.30mm\u003c\/li\u003e\n\u003cli\u003e0.35mm\u003c\/li\u003e\n\u003cli\u003e0.50mm\u003c\/li\u003e\n\u003cli\u003e0.60mm\u003c\/li\u003e\n\u003cli\u003e0.80mm\u003c\/li\u003e\n\u003cli\u003eE3D Nozzle Spanner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote: V6 style nozzles can be installed on the Original Prusa MK4\/S, CORE and XL 3D printers with the \u003ca rel=\"noopener\" href=\"https:\/\/www.printedsolid.com\/products\/genuine-e3d-v6-adaptor-for-prusa-mk4-xl\" target=\"_blank\"\u003eNextruder V6 Nozzle Adapter\u003c\/a\u003e (sold separately).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":32848722198613,"sku":"B013VBTM80","price":31.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/fun_pack_open.jpg?v=1536083843"},{"product_id":"1-75mm-e3d-volcano-replacement-nozzle","title":"1.75mm E3D Volcano replacement nozzle (EOL)","description":"\u003cp\u003eChoose between 3 materials for your next E3D Volcano nozzle\u003c\/p\u003e\n\u003ch1\u003eBrass\u003c\/h1\u003e\n\u003cp\u003eHigh-performance brass nozzles for your Volcano HotEnd. From super-fine to super-fat layering, you'll be making stronger, faster and bigger prints in no time with the Volcano HotEnd PowerUp! Many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano.\u003c\/p\u003e\n\u003ch1\u003eHardened Steel\u003c\/h1\u003e\n\u003cp\u003eDurable hardened Steel nozzles for your Volcano HotEnd. 3D printing with abrasives such as carbon fiber, glow-in-the-dark PLA or even filled filaments such as Woodfill all take their toll on brass nozzles. E3D's Hardened Steel nozzles will resist wear and last a lifetime. Requires a HotEnd modified with a Volcano. \u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003ePlated Copper\u003c\/h1\u003e\n\u003cp\u003eDurable, non-stick, extremely high temperature performance Volcano nozzles. Take your your 3D printing to the next level by modifying your Volcano with these nozzles. Made from a unique copper alloy, they will not begin to soften or anneal below 500°C, and they are highly resistant to debris and burnt-on plastic thanks to their nickel coating. \u003cbr\u003e\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 \/ Brass","offer_id":12599271293013,"sku":"4025828681","price":3.43,"currency_code":"USD","in_stock":true},{"title":"0.4 \/ Harden Steel","offer_id":12599280992341,"sku":"4025828691","price":11.43,"currency_code":"USD","in_stock":false},{"title":"0.4 \/ Plated Copper","offer_id":12599281025109,"sku":"4055472320","price":8.43,"currency_code":"USD","in_stock":true},{"title":"0.6 \/ Brass","offer_id":12599281057877,"sku":"4025828682","price":3.43,"currency_code":"USD","in_stock":false},{"title":"0.6 \/ Harden Steel","offer_id":12599281090645,"sku":"4025828692","price":11.43,"currency_code":"USD","in_stock":false},{"title":"0.6 \/ Plated Copper","offer_id":12599281123413,"sku":"4055472482","price":8.43,"currency_code":"USD","in_stock":true},{"title":"0.8 \/ Brass","offer_id":12599281156181,"sku":"4025828683","price":3.43,"currency_code":"USD","in_stock":true},{"title":"0.8 \/ Harden Steel","offer_id":12599281188949,"sku":"4025828693","price":11.43,"currency_code":"USD","in_stock":true},{"title":"0.8 \/ Plated Copper","offer_id":12599281221717,"sku":"4055472673","price":8.43,"currency_code":"USD","in_stock":true},{"title":"1.0 \/ Brass","offer_id":12599281254485,"sku":"4025828684","price":3.43,"currency_code":"USD","in_stock":true},{"title":"1.0 EOL \/ Harden Steel","offer_id":12599281287253,"sku":"4025828694","price":11.43,"currency_code":"USD","in_stock":true},{"title":"1.0 EOL \/ Plated Copper","offer_id":12599281320021,"sku":"4055473030","price":8.43,"currency_code":"USD","in_stock":true},{"title":"1.2 \/ Brass","offer_id":12599281352789,"sku":"4025828685","price":3.43,"currency_code":"USD","in_stock":true},{"title":"1.2 EOL \/ Harden Steel","offer_id":12599281385557,"sku":"4025828695","price":11.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/volcano-nozzle2.jpg?v=1536086071"},{"product_id":"duet2wifi","title":"Duet2WiFi (EOL)","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eThis is the latest version of the Duet 2 Wifi, v1.04.\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eDuet 2 Wifi is an advanced 32 bit electronics for the control of 3D printers and other CNC machines. It has the same features as the \u003ca href=\"https:\/\/www.printedsolid.com\/products\/duet2ethernet\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDuet 2 Ethernet\u003c\/a\u003e other than providing a WiFi connectivity rather than ethernet, \u003ca href=\"https:\/\/duet3d.dozuki.com\/Wiki\/Hardware_Overview\" target=\"_blank\" rel=\"noopener noreferrer\"\u003efull feature description is available in our documentation \u003c\/a\u003e, in summary:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003ePowerful 32 Bit Processor\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eDedicated Wifi module\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eSuper quiet TMC2660 stepper drivers, up to 256 microstepping. \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eHigh speed SD card and support for a second SD external card if required.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eDual extruders on the main board, up to 5 more extruders on the \u003ca href=\"https:\/\/www.printedsolid.com\/products\/duex\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eexpansion board\u003c\/a\u003e. \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eHigh Power rating: Each stepper driver is capable of 2.8A motor current, currently limited in software to 2.4A. The bed heater channel is specifically designed for high current (18A).\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eConnect via PC, tablet or smartphone on the same network to the on board web interface. \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eSetup your printer and update the firmware through the \u003ca href=\"https:\/\/duet3d.com\/wiki\/Duet_Web_Control\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eweb interface\u003c\/a\u003e. \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eAll common 3D printer geometries are supported\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eExpandable up to 7 extruders with Firmware support for mixing nozzles and remapping axes to use high power external drivers.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eSupport for the \u003ca href=\"https:\/\/www.printedsolid.com\/products\/duet-paneldue-integrated\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePanelDue\u003c\/a\u003e: a full colour graphic touch screen.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\" face=\"arial, helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 18px;\"\u003eProvided with Molex compatible plugs and crimps as well as ferrules for power and heater terminals.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003e\u003cspan style=\"font-family: arial,helvetica,sans-serif;\"\u003eFurther details of the available addons are given on the Wiki at \u003ca href=\"https:\/\/duet3d.com\/wiki\/Addon_Hardware_Features\"\u003ehttps:\/\/duet3d.com\/wiki\/Addon_Hardware_Features\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Duet3D","offers":[{"title":"Default Title","offer_id":12612251025493,"sku":"5060662920486","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/DuetWiFi01.png?v=1536944533"},{"product_id":"e3d-v6-heatbreak-single","title":"E3D V6 Heatbreak - Single - 1.75mm","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\nAuthentic E3D Heatbreak component.  \n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":32848730423381,"sku":"4025828611","price":9.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/175hb_9cc1e989-caa5-4838-b594-8b723de10a10.jpg?v=1537367084"},{"product_id":"prusa-mk2-mk3-thermistor-cartridge","title":"E3D Prusa MK2 MK3 Thermistor Cartridge","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis is the standard\u003ca href=\"https:\/\/www.printedsolid.com\/products\/e3d-thermistor-cartridge\"\u003e E3D Thermistor Cartridge\u003c\/a\u003e that has been customized for installation on the Prusa MK2 \/ MK3 by splicing in 750mm of cable.  \u003c\/p\u003e\n\u003cp\u003eA custom made thermistor encapsulated into an easy to use cartridge package.\u003c\/p\u003e\n\u003cp\u003eUsing our proven Semitec 104GT thermistors, which are then potted into a cylindrical copper cartridge with a high conductivity ceramic based adhesive. The legs are insulated with fibreglass sleeving, and terminated with a Molex Microfit 3.0 connector.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":12645439144021,"sku":"7093375032","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/prusa-therm2.png?v=1538075661"},{"product_id":"thermal-paste-1g-packet","title":"Thermal Paste - 1g packet","description":"\u003cp\u003eThis 1g sachet is the same that comes with \u003ca href=\"http:\/\/printedsolid.com\/e3d\"\u003eE3D HotEnd \u003c\/a\u003ekits, and is perfect for helping your heatsink to dissipate excess heat. It's made up of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicone Compounds 50%\u003c\/li\u003e\n\u003cli\u003eCompounds of carbon: 20%\u003c\/li\u003e\n\u003cli\u003eMetal Oxide Compounds: 30%\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":12650521591893,"sku":"4025828567","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/Thermal-Compound_8.png?v=1538343760"},{"product_id":"e3d-high-temperature-65w-heater-cartridge","title":"E3D High Temperature 65W Heater Cartridge","description":"\u003cp\u003e\u003cspan\u003eHeaters capable of operating up to 550°C for extended periods of time. For printing high temperature thermoplastics. Come with high ampage connectors and extension leads, the cartridge has the wires exiting at a 90° angle from the casing with a strain relief.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVoltage: 12V\/24V\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePower: Up to 65W\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMax operating temp: 550°C.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLead length: 2m\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e⚠️WARNINGS⚠️\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- These heaters are more than capable of reaching temperatures that will soften the aluminium block shipped as standard with our heaters. These must only be used with a copper block. We also recommend coupling this with a copper nozzle, as the hardened nozzles will lose some hardness at these temperatures, and the copper will offer better thermal conductivity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- For the 12V version, some printers' electronics are not able to withstand the current required by the heaters. If this is your case, or you don't want to risk blowing your board up, please purchase the MOSFET switch daughter board sold with the SuperVolcano\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRead all about the cartridges in E3D's latest High Temperature \u003ca href=\"https:\/\/e3d-online.com\/blog\/2018\/10\/22\/%E2%9A%A0%EF%B8%8F-e3ds-high-temperature-products-have-launched-%E2%9A%A0%EF%B8%8F\/\"\u003eblog post\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"E3D","offers":[{"title":"12V (EOL)","offer_id":12688596795477,"sku":"8000021808","price":75.0,"currency_code":"USD","in_stock":true},{"title":"24V","offer_id":12688596828245,"sku":"8000021815","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/ht_hc.jpg?v=1540760695"},{"product_id":"ldo-5015-5v-blower-fan-df5015h05s","title":"LDO 5015 5v blower fan DF5015H05S (EOL)","description":"\u003cul\u003e\n\u003cli\u003e5015 Form Factor\u003c\/li\u003e\n\u003cli\u003e4500 RPM\u003c\/li\u003e\n\u003cli\u003e7.38CFM\u003c\/li\u003e\n\u003cli\u003e29dBA\u003c\/li\u003e\n\u003cli\u003e3 pin connect with 750mm leads\u003c\/li\u003e\n\u003cli\u003ePerfect fit for Prusa MK3 blower fan\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e** please note this is a 3rd party fan and the fan sensor may not read correctly on the Prusa printer this fan will still work but you will need to disable the sensor in the menu.\"\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/files\/LDO-DF5015H05S_Blower.pdf?v=1612213109\"\u003eFull Spec Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"LDO","offers":[{"title":"Default Title","offer_id":21076373667925,"sku":"76229209","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/Blower1.png?v=1570479678"},{"product_id":"pinda-2-probe-replacement","title":"PINDA 2 Probe Replacement (EOL)","description":"\u003cp\u003eDrop in replacement PINDA 2 probe for Prusa MK3 printers. Cable is already terminated with the correct pins and is ready to be installed right away.\u003c\/p\u003e","brand":"LDO","offers":[{"title":"Default Title","offer_id":21076432879701,"sku":"016627555182","price":13.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/PINDA2-2.png?v=1543119523"},{"product_id":"pinda-1-probe-replacement","title":"PINDA 1 Probe Replacement (EOL)","description":"\u003cp\u003eDrop in replacement PINDA 1 probe for Prusa MK2 printers. Cable is already terminated with the correct pins and is ready to be installed right away.\u003c\/p\u003e","brand":"LDO","offers":[{"title":"Default Title","offer_id":21076450607189,"sku":"016627555175","price":7.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/PINDA1-1.png?v=1543119539"},{"product_id":"prusa-idler-replacement","title":"Prusa Idler replacement (EOL)","description":"\u003cp\u003ePerfect drop in replacement for the Prusa idler pulley with bearings installed by LDO motors.\u003c\/p\u003e","brand":"LDO","offers":[{"title":"Default Title","offer_id":21076493336661,"sku":"016627555199","price":3.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0887\/0138\/products\/LDO-Idiler.png?v=1543010780"}],"url":"https:\/\/www.printedsolid.com\/collections\/top-sellers.oembed?page=4","provider":"Printed Solid","version":"1.0","type":"link"}