FREE SHIPPING IN THE CONTINENTAL U.S. ON ORDERS OVER $30
E3D Dual Extrusion – Chimera+ Liquid Cooled 1.75mm
IMPORTANT NOTE: This is a liquid cooled hot end and requires installation of a cooling loop. You can use your own design or the one E3D makes here.
Dual Extrusion+ Chimera
The next generation of the E3D Dual Extrusion Chimera, redesigned in 2018. This hot end has two filament inlets and two filament outlets for traditional dual extrusion in a compact package. It is designed to work with liquid cooling systems for better performance and to allow use of higher temperature filaments.
Same great printing performance and possibilities; new compatibility and features.
- The Chimera heater block has had a complete redesign, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.
- The distance between the filament paths is 2mm larger compared to the old-style Chimera. This makes Chimera+ compatible with the Kraken, for those looking to experiment.
Things to watch out for:
- Chimera+ fit standard fans, thermistors and heater cartridges. It will also work with Capricorn bowden tubing
- Chimera+ is compatible with cartridge-style heaters and thermistors, opening the door to PT100s and thermocouples.
- An exceptionally light-weight, effective water-cooled heatsink that is compatible with our water-cooling kit and nylon tubing.
Chimera+ is no longer compatible with
Old-style Cyclops heater blocks
Old-style Cyclops and Chimera heatsinks due to the increased distance between the filament inputs
Bead-type temperature sensors
- Due to the design change, this will not be compatible with some user designed mounts for the previous Cyclops or Chimera.
What's in the Box?
Water-Cooled Cold Side
- Water-cooled heatsink
- 4x black plastic collets
- 4x blue plastic collet clips
- Cyclops+ fixings kit (suitable for Cyclops+ and Chimera+)
- 800mm PTFE bowden tubing
Chimera Hot Side
- Heatsink compound
- 2x silicone socks
- 2x 0.4mm V6 brass nozzles
- 2x V6 heater blocks
- Fixings kit
- 2x30W Heater cartridges (12V/24V)
- 2x Thermistor cartridges