E3D

E3D Dual Extrusion – Cyclops+ Liquid Cooled 1.75mm EOL

E3D Dual Extrusion – Cyclops+ Liquid Cooled 1.75mm EOL

Regular price $ 134.80 USD
Regular price Sale price $ 134.80 USD
Sale Sold out
View full details
Skip to product information
1 of 2

IMPORTANT NOTE:  This is a liquid cooled hot end and requires installation of a cooling loop.  You can use your own design or the one E3D makes here.  

Dual Extrusion+ Cyclops

The next generation of the E3D Dual Extrusion Cyclops, redesigned in 2018.  This hot end has two filament inlets and one filament outlet for experimental dual extrusion in a compact package.  It is designed to work with liquid cooling systems for better performance and to allow use of higher temperature filaments.

From E3D:

Same great printing performance and possibilities; new compatibility and features.

Cyclops Rework

  • The Cyclops heater block has had a complete redesign, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.
  • The distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.

Things to watch out for:

  • We recommend only using similar plastics when “mixing” using the Cyclops+ HotEnd.

  • 1.75mm bowden setups only

Compatibility

  • Chimera+ fit standard fans, thermistors and heater cartridges. It will also work with Capricorn bowden tubing
  • Chimera+ is compatible with cartridge-style heaters and thermistors, opening the door to PT100s and thermocouples.

Water Cooling

  • An exceptionally light-weight, effective water-cooled heatsink that is compatible with our water-cooling kit and nylon tubing.

Cyclops+ is no longer compatible with

  • Old-style Cyclops heater blocks

  • Old-style Cyclops and Chimera heatsinks due to the increased distance between the filament inputs

  • Bead-type temperature sensors

  • Due to the design change, this will not be compatible with some user designed mounts for the previous Cyclops or Chimera.  

What's in the Box?

 Liquid Cooled Hot Side

Water-Cooled Cold Side

  • Water-cooled heatsink
  • 4x black plastic collets
  • 4x blue plastic collet clips
  • Cyclops+ fixings kit (suitable for Cyclops+ and Chimera+)
  • 800mm PTFE bowden tubing

     

       Cyclops Hot Side

      Cyclops Hot Side

      • 0.4mm Cyclops nozzle
      • Cyclops heater block
      • 2x Kraken heatbreaks
      • Cyclops+ hotside fixings kit
      • Heatsink Compound
      • 30W Heater cartridge (12V/24V)
      • Thermistor cartridge